Banner
Home      Log In      Contacts      FAQs      INSTICC Portal
 
Documents

Call for Papers

ICINCO is sponsored by INSTICC – Institute for Systems and Technologies of Information, Control and Communication

SCOPE

The purpose of the 15th International Conference on Informatics in Control, Automation and Robotics (ICINCO) is to bring together researchers, engineers and practitioners interested in the application of informatics to Control, Automation and Robotics. Four simultaneous tracks will be held, covering Intelligent Control Systems, Optimization, Robotics, Automation, Signal Processing, Sensors, Systems Modelling and Control, and Industrial Informatics.

Informatics applications are pervasive in many areas of Control, Automation and Robotics; This conference intends to emphasize this connection, therefore, authors should highlight the benefits of Information Technology (IT) in these areas. Ideas on how to solve problems using IT, both in R&D and industrial applications, are welcome. Papers describing advanced prototypes, systems, tools and techniques and general survey papers indicating future directions are also encouraged. Papers describing original work are invited in any of the areas listed below. Accepted papers, presented at the conference by one of the authors, will be published in the Proceedings of ICINCO, with an ISBN. Acceptance will be based on quality, relevance and originality. Both full research reports and work-in-progress reports are welcome. There will be both oral and poster sessions.

Special sessions, dedicated to case-studies and commercial presentations, as well as tutorials dedicated to technical/scientific topics are also envisaged: companies interested in presenting their products/methodologies or researchers interested in holding a tutorial, workshop or special session are invited to contact the conference secretariat or visit the conference website.

CONFERENCE AREAS

Avaliable soon.

KEYNOTE SPEAKERS

Christian SchletteUniversity of Southern Denmark, Denmark, Denmark
Keith ClarkImperial College London, United Kingdom, United Kingdom
Bruno SicilianoUniversity of Naples Federico II, Italy, Italy

PAPER SUBMISSION

Authors should submit a paper in English, carefully checked for correct grammar and spelling, addressing one or several of the conference areas or topics. Each paper should clearly indicate the nature of its technical/scientific contribution, and the problems, domains or environments to which it is applicable. To facilitate the double-blind paper evaluation method, authors are kindly requested to produce and provide the paper WITHOUT any reference to any of the authors, including the authors’ personal details, the acknowledgments section of the paper and any other reference that may disclose the authors’ identity.

Only original papers should be submitted. Authors are advised to read INSTICC's ethical norms regarding plagiarism and self-plagiarism thoroughly before submitting and must make sure that their submissions do not substantially overlap work which has been published elsewhere or simultaneously submitted to a journal or another conference with proceedings. Papers that contain any form of plagiarism will be rejected without reviews.

Authors can submit their work in the form of a Regular Paper, representing completed and validated research, or as a Position Paper, portraying a short report of work in progress or an arguable opinion about an issue discussing ideas, facts, situations, methods, procedures or results of scientific research focused on one of the conference topic areas. All papers must be submitted through the online submission platform PRIMORIS and should follow the instructions and templates that can be found under Guidelines and Templates. After the paper submission has been successfully completed, authors will receive an automatic confirmation e-mail.

PUBLICATIONS

All accepted papers will be published in the conference proceedings, under an ISBN reference, on paper and on digital support.
SCITEPRESS is a member of CrossRef (http://www.crossref.org/) and every paper on our digital library is given a DOI (Digital Object Identifier).
All papers presented at the conference venue will be available at the SCITEPRESS Digital Library.
A short list of presented papers will be selected so that revised and extended versions of these papers will be published by Springer in a LNEE Series book.

A short list of papers presented at the conference will be selected for publication of extended and revised versions in a special issue of Robotics Journal.

.
The proceedings will be submitted for indexation by .

SECRETARIAT

ICINCO Secretariat
Address: Av. D. Manuel I, 27A, 2º esq.
             2910-595 Setubal - Portugal
Tel.: +351 265 520 185
Fax: +351 265 520 186
e-mail: icinco.secretariat@insticc.org
Web: https://icinco.scitevents.org

CONFERENCE CHAIR

Kurosh MadaniUniversity of Paris-EST Créteil (UPEC), France

PROGRAM CHAIR

Oleg GusikhinFord Motor Company, United States

PROGRAM COMMITTEE MEMBERS

Hussein A. Abdullah, University of Guelph, Canada
Ghassan Abu-Lebdeh, American University of Sharjah, United Arab Emirates
El-Houssaine Aghezzaf, Ghent University, Faculty of Engineering and Architecture, Belgium
Eugenio Aguirre, University of Granada, Spain
Erdinç Altug, Istanbul Technical University, Türkiye
Mihail Hristov Antchev, Technical University - Sofia, Bulgaria
Rui Araujo, University of Coimbra, Portugal
Rafael Aroca, Universidade Federal de São Carlos, Brazil
T. Asokan, Indian Institute of Technology Madras, India
M. Amine Atoui, UBS, France
Alfonso Baños, Universidad de Murcia, Spain
Guilherme Barreto, Universidade Federal do Ceará, Brazil
Roman Barták, Charles University, Czechia
Marcelo Becker, Escola de Engenharia de São Carlos, Brazil
Carsten Behn, Schmalkalden University of Applied Sciences, Germany
Faïz Ben Amar, Université Pierre et Marie Curie, Institut Systèmes Intelligents et de Robotique, France
Karsten Berns, University of Kaiserslautern-Landau, Germany
Reinaldo Bianchi, Centro Universitario da FEI, Brazil
Mauro Birattari, Université Libre de Bruxelles, Belgium
Jean-Louis Boimond, ISTIA - LARIS, France
Magnus Boman, The Royal Institute of Technology, Sweden
Richard D. Braatz, Massachusetts Institute of Technology, United States
Kalinka Castelo Branco, ICMC – USP, Brazil
Glen Bright, University of KwaZulu-Natal, South Africa
Sebastien Briot, Laboratoire des Sciences du Numérique de Nantes, France
Marvin Bugeja, University of Malta, Malta
Kevin Burn, University of Sunderland, United Kingdom
Fernando Caballero, University of Seville, Spain
Kenneth Camilleri, University of Malta, Malta
Angelo Cangelosi, University of Plymouth, United Kingdom
Giuseppe Carbone, Università della Calabria, Italy
Alessandro Casavola, University of Calabria, Italy
Marco Castellani, University of Birmingham, United Kingdom
Jaime Cerda, Universidad Michoacana de San Nicolas de Hidalgo, Mexico
Kuo-Ming Chang, National Kaohsiung University of Applied Sciences, China
Albert Cheng, University of Houston, United States
Sung-Bae Cho, Yonsei University, Republic of Korea
Paul Christodoulides, Cyprus University of Technology, Cyprus
Feng Chu, University of Evry Val d'Essonne
Daisuke Chugo, Kwansei Gakuin University, Japan
Carlos Coello Coello, CINVESTAV-IPN, Mexico
Yechiel Crispin, Embry-riddle Aeronautical University, United States
Erik Cuevas, Universidad de Guadalajara, Mexico
José Boaventura Cunha, University of Trás-os-montes and Alto Douro, Portugal
Joshua Dayan, Technion – Israel Institute of Technology, Israel
Angel P. Del Pobil, Universitat Jaume I, Spain
Kyriakos Deliparaschos, Cyprus University of Technology, Cyprus
Mingcong Deng, Tokyo University of Agriculture and Technology, Japan
Paolo Di Giamberardino, Sapienza University of Rome, Italy
Wenjie Dong, University of Texas Rio Grande Valley, United States
António Dourado, University of Coimbra, Portugal
Vasile Dragan, Romanian Academy, Romania
Venky Dubey, Bournemouth University, United Kingdom
Ioan Dumitrache, University “POLITEHNICA” of Bucharest, Romania
Richard J. Duro, Universidade Da Coruña, Spain
Marc Ebner, Ernst-Moritz-Arndt-Universität Greifswald, Germany
Petr Ekel, Pontifical Catholic University of Minas Gerais, Brazil
Ashraf Elnagar, University of Sharjah, United Arab Emirates
Simon G. Fabri, University of Malta, Malta
Mohammed Sami Fadali, UNR, United States
Christophe Farges, Bordeaux University, IMS – UMR 5218 CNRS, France
Luca Ferrarini, Politecnico di Milano, Italy
Paolo Fiorini, University of Verona, Italy
Juan J. Flores, University of Michoacan, Mexico
José Alberto Fonseca, DETI/IT, Universidade de Aveiro & Micro I/O, Portugal
Mauro Franceschelli, Università di Cagliari, Italy
Georg Frey, Automation and Energy Systems, Saarland University, Germany
Toyomi Fujita, Tohoku Institute of Technology, Japan
Takeshi Furuhashi, Nagoya University, Japan
Mauro Gaggero, National Research Council of Italy, Italy
Iván García Daza, University of Alcalá, Spain
Paulo Gil, Universidade Nova de Lisboa, Portugal
Giuseppina Carla Gini, Politecnico di Milano, Italy
Maria Gini, University of Minnesota, United States
Arthur Gómez, Universidade do Vale do Rio dos Sinos, Brazil
Lucian Teodor Grigorie, Military Technical Academy ''Ferdinand I'', Bucharest, Romania
Lech Grzesiak, Warsaw University of Technology, Poland
Jan Haase, Helmut Schmidt University of the Federal Armed Forces Hamburg, Germany
Wolfgang Halang, Qingdao University of Science and Technology, China
Kensuke Harada, Osaka University, Japan
Jennifer Harding, Loughborough University, United Kingdom
Dominik Henrich, University of Bayreuth, Germany
Arturo Hernández - Aguirre, Centre for Research in Mathematics, Mexico
Yasuhisa Hirata, Tohoku University, Japan
Wladyslaw Homenda, Warsaw University of Technology, Poland
Jonathan How, Massachusetts Institute of Technology, United States
Yisheng Huang, Nat. Ilan Univ., China
Daniela Iacoviello, Sapienza University of Rome, Italy
Gianluca Ippoliti, Università Politecnica delle Marche, Italy
Ivan Ivanov, Sofia University "St. Kl. Ohridski", Bulgaria
Sarangapani Jagannathan, Missouri University of Science and Technology, United States
N. Jawahar, Thiagarajar College of Engineering, India
Thira Jearsiripongkul, Thammasat University, Thailand
Michael Jenkin, York University, Canada
Wootae Jeong, Korea Railroad Research Institute, Republic of Korea
Isabel Jesus, ISEP/IPP - School of Engineering, Polytechnic Institute of Porto, Portugal
Márcio José da Cunha, Federal University of Uberlândia, Brazil
Marc Jungers, CNRS - Université de Lorraine, France
Fabrício Junqueira, University of São Paulo (USP), Brazil
Mansour Karkoub, Texas A&M Universiy, Qatar
Tohru Kawabe, University of Tsukuba, Japan
Rafael Kelly, CICESE Research Center, Mexico
DaeEun Kim, Yonsei University, Republic of Korea
Krzysztof Kozlowski, Poznan University of Technology, Poland
Ondrej Krejcar, University of Hradec Kralove, Czechia
Masao Kubo, Narional Defense Academy of Japan, Japan
Sébastien Lahaye, Istia - LARIS, France
Jose L. Martinez Lastra, Tampere University of Technology, FAST Laboratory, Finland
Kauko Leiviskä, Independent Researcher, Finland
Roland Lenain, Irstea, France
Fabrizio Leonardi, FEI University, Brazil
Guoshi Li, University of North Carolina at Chapel Hill, United States
Tsai-Yen Li, National Chengchi University, China
Christos Liambas, Aristotle University of Thessaloniki, Greece
Gordon Lightbody, University College Cork, Ireland
Guoping Liu, University of South Wales, United Kingdom
Antonio M. Lopes, University of Porto, Portugal
Sérgio F. Lopes, University of Minho, Portugal
Gonzalo Lopez-Nicolas, Universidad de Zaragoza, Spain
Yu-Shen Lu, National Taiwan Normal University, China
Martin Lukac, Nazarbayev University, Kazakhstan
Danilo Maccio, National Research Council of Italy, Italy
José Tenreiro Machado, Institute of Engineering, Polytechnic of Porto, Portugal
Anthony A Maciejewski, Colorado State University, United States
Ana Madureira, ISEP/IPP, Portugal
Frederic Maire, Queensland University of Technology, Australia
Om Malik, University of Calgary, Canada
Stamatis Manesis, University of Patras, Greece
Marga Marcos, Universidad del Pais Vasco, Spain
Philippe Martinet, INRIA, France
Tariq Masood, University of Cambridge, United Kingdom
Alicja Mazur, Wroclaw University of Technology, Poland
Ross McAree, University of Queensland, Australia
Joaquim Melendez, University of Girona, Spain
Rafael Santos Mendes, University of Campinas, Brazil
Luis Merino, Pablo de Olavide University, Spain
Nadhir Messai, University of Reims Champagne-Ardenne, France
Konstantinos Michail, Cyprus University of Technology, Cyprus
Sanya Mitaim, Thammasat University, Thailand
Francesco Carlo Morabito, University Mediterranea of Reggio Calabria, Italy
Vladimir Mostyn, VSB - Technical University of Ostrava, Czechia
Vassilis C. Moulianitis, University of the Aegean, Greece
George Moustris, National Technical University of Athens, Greece
Riccardo Muradore, University of Verona, Italy
Saeid Nahavandi, Deakin University, Australia
Andreas Nearchou, University of Patras, Greece
Juan J. Nieto, University of Santiago de Compostela, Spain
Jun Okamoto, Escola Politécnica da USP, Brazil
Fernando Santos Osorio, USP - Universidade de Sao Paulo, Brazil
Ju H. Park, Yeungnam University, Republic of Korea
Igor Paromtchik, Robotic Technologies, France
Ignacio Parra-Alonso, University of Alcalá, Spain
Pierre Payeur, University of Ottawa, Canada
Dariusz Pazderski, Poznan University of Technology, Poland
Qingjin Peng, University of Manitoba, Canada
D. T. Pham, The University of Birmingham, United Kingdom
Nirvana Popescu, University Politehnica of Bucharest, Romania
Andrey Postnikov, The University of Lincoln, United Kingdom
Cesar De Prada Moraga, Universidad de Valladolid, Spain
Radu-Emil Precup, Politehnica University of Timisoara, Romania
José Ragot, Centre de Recherche en Automatique de Nancy, France
Akshay Rajhans, MathWorks, United States
Oscar Reinoso, Miguel Hernandez University, Spain
Mihailo Ristic, Imperial College London, United Kingdom
Roseli A. Francelin Romero, University of São Paulo, Brazil
Juha Röning, University of Oulu, Finland
Jocelyn Sabatier, IMS Laboratory - Bordeaux University, France
Christophe Sabourin, Univ. Paris Est Creteil, LISSI, France
Mehmet Sahinkaya, Kingston University London, United Kingdom
Priti Srinivas Sajja, Sardar Patel University, India
Antonio Sala, Universitat Politecnica de Valencia, Spain
Roberto Sanchis Llopis, Universitat Jaume I, Spain
Nilanjan Sarkar, Vanderbilt University, United States
Jurek Sasiadek, Carleton University, Canada
Daniel Schmidt, SEW EURODRIVE GmbH, Germany
Gerhard Schweitzer, ETH Zurich, Switzerland
Gerald Seet, Nanyang Technological University , Singapore
João Sequeira, Instituto Superior Técnico, Portugal
Roman Sergienko, Gini GmbH, Germany
Madhavan Shanmugavel, Mechatronics Engineering, SRM Institute of Science and Technology, India
Jinhua She, Tokyo University of Technology, Japan
Manuel Silva, ISEP-Instituto Superior de Engenharia do Porto, Portugal
Vasile Sima, Technical Sciences Academy of Romania, Romania
Daniel Simon, INRIA, France
Andrzej Sluzek, Khalifa University, United Arab Emirates
Jorge Solis, Karlstad University / Waseda University, Sweden
Stefano Squartini, Università Politecnica delle Marche, Italy
Burkhard Stadlmann, Upper Austria University of Applied Sciences, Wels, Austria
J. D. Stigter, Wageningen University, Netherlands
Olaf Stursberg, University of Kassel, Germany
Les Sztandera, Jefferson (Philadelphia University + Thomas Jefferson University), United States
Tomasz Tarczewski, Nicolaus Copernicus University, Poland
Daniel Thalmann, Ecole Polytechnique Federale de Lausanne, Switzerland
Simon Thompson, AIST, Japan
Gui Yun Tian, Newcastle University, United Kingdom
Geetam Tomar, Machine Intelligence Research Labs, India
Germano Torres, PS Solutions, Brazil
Mohamed Trabia, University of Nevada, Las Vegas, United States
Wa-Muzemba Anselme Tshibangu, Morgan State University, United States
Antonios Tsourdos, Cranfield University, United Kingdom
Ali Emre Turgut, Middle East Technical University, Türkiye
Bartlomiej Ufnalski, Warsaw University of Technology, Poland
Angel Valera, Universidad Politécnica de Valencia, Spain
Alexandra Velasco, Universidad Militar Nueva Granada, Colombia
Ramiro Velazquez, Universidad Panamericana, Mexico
Gianni Vercelli, Università degli Studi di Genova, Italy
Hugo Vieira Neto, Federal University of Technology - Paraná, Brazil
Arnoud Visser, Universiteit van Amsterdam, Netherlands
Damir Vrancic, Jožef Stefan Institute, Slovenia
Bernardo Wagner, Leibniz Universität Hannover, Germany
Feng Wan, University of Macau, China
Jinling Wang, University of New South Wales (UNSW) Australia, Australia
Long Wang, Peking University, China
Jingyu Wang, Northwestern Polytechnical University (NPU), China
James Whidborne, Cranfield University, United Kingdom
Warren White, Kansas State University, United States
Min Wu, China University of Geosciences, China
Qinmin Yang, Zhejiang University, China
Yuming Zhang, Univ. of Kentucky, United States
Jie Zhang, Newcastle University, United Kingdom
Primo Zingaretti, Università Politecnica delle Marche, Italy
Argyrios Zolotas, University of Lincoln, United Kingdom

footer