Banner
Home      Log In      Contacts      FAQs      INSTICC Portal
 
Documents

Call for Papers

ICINCO is sponsored by INSTICC – Institute for Systems and Technologies of Information, Control and Communication

SCOPE

The purpose of the International Conference on Informatics in Control, Automation and Robotics (ICINCO) is to bring together researchers, engineers and practitioners interested in the application of informatics to Control, Automation and Robotics. Four simultaneous tracks will be held, covering Intelligent Control Systems, Optimization, Robotics, Automation, Signal Processing, Sensors, Systems Modelling and Control, and Industrial Informatics.

Authors should highlight the benefits of Information Technology (IT) in these areas. Ideas on how to solve problems using IT, both in R&D and industrial applications, are welcome. Papers describing advanced prototypes, systems, tools and techniques and general survey papers indicating future directions are also encouraged. Papers describing original work are invited in any of the areas listed below. Accepted papers, presented at the conference by one of the authors, will be published in the Proceedings of ICINCO, with an ISBN. Acceptance will be based on quality, relevance and originality. Both full research reports and work-in-progress reports are welcome. There will be both oral and poster sessions.

Special sessions, dedicated to case-studies and commercial presentations, as well as tutorials dedicated to technical/scientific topics are also envisaged: companies interested in presenting their products/methodologies or researchers interested in holding a tutorial, workshop or special session are invited to contact the conference secretariat or visit the conference website.

CONFERENCE AREAS

Each of these topic areas is expanded below but the sub-topics list is not exhaustive. Papers may address one or more of the listed sub-topics, although authors should not feel limited by them. Unlisted but related sub-topics are also acceptable, provided they fit in one of the following main topic areas:

1. INTELLIGENT CONTROL SYSTEMS AND OPTIMIZATION
2. ROBOTICS AND AUTOMATION
3. SIGNAL PROCESSING, SENSORS, SYSTEMS MODELLING AND CONTROL
4. INDUSTRIAL INFORMATICS


AREA 1: INTELLIGENT CONTROL SYSTEMS AND OPTIMIZATION


  • Data Based Control
  • Decision Support Systems
  • Distributed Control Systems
  • Engineering Applications on Intelligent Control Systems and Optimization
  • Evolutionary Computation and Control
  • Fuzzy Control
  • Genetic Algorithms
  • Hybrid Systems
  • Intelligent Fault Detection, Diagnosis and Prognostics
  • Knowledge-Based Systems Applications
  • Mechatronics Systems
  • Machine Learning in Control Applications
  • Networked Control
  • Neural Networks Based Control Systems
  • Optimization Algorithms
  • Planning and Scheduling
  • Soft Computing
  • Software Agents for Intelligent Control Systems

AREA 2: ROBOTICS AND AUTOMATION


  • Autonomous Agents
  • Cognitive Approach for Robotics
  • Collective and Social Robots
  • Control and Supervision Systems
  • Engineering Applications on Robotics and Automation
  • Guidance, Navigation and Control
  • Human-Machine Interfaces
  • Humanoid Robots
  • Human-Robots Interfaces
  • Image Processing
  • Intelligent Transportation Technologies and Systems
  • Mobile Robots and Intelligent Autonomous Systems
  • Modelling, Simulation and Architecture
  • Perception and Awareness
  • Robot Design, Development and Control
  • Space and Underwater Robots
  • Soft Robotics
  • Surveillance, Fault Detection and Diagnosis
  • Telerobotics and Teleoperation
  • Vehicle Control Applications
  • Virtual Environment, Virtual and Augmented Reality
  • Vision, Recognition and Reconstruction
  • Wearable Robotics for Assistance and Rehabilitation
  • Robots in the Internet of Things

AREA 3: SIGNAL PROCESSING, SENSORS, SYSTEMS MODELLING AND CONTROL


  • Adaptive Signal Processing and Control
  • Biologically Inspired Sensors and Controllers
  • Defect and Change Detection and Identification
  • Engineering Applications
  • Information-Based Models for Control
  • Intelligent Components for Control
  • Mechanical, Force and Tactile Sensors
  • Modelling, Analysis and Control of Discrete-Event Systems
  • Modelling, Analysis and Control of Hybrid Dynamical Systems
  • Nonlinear Signals and Systems
  • Optimization Problems in Signal Processing
  • Processing Biological Signals
  • Real-Time Systems Control
  • Sensors Fusion
  • Signal Reconstruction
  • System Identification
  • System Modelling
  • Time-Frequency Analysis

AREA 4: INDUSTRIAL INFORMATICS


  • Digital Twins
  • Energy Efficiency and Green Manufacturing
  • Human Factors & Human-System Interface
  • Industrial Networks, Automation and Robotics
  • Industrial Internet of Things and Sensor Networks
  • Intelligent Design and Manufacturing
  • Manufacturing Systems Engineering
  • Performance Evaluation and Optimization
  • Precision Engineering
  • Production Planning, Management and Control
  • Quality Control and Management
  • Resources and Knowledge Management in Industry
  • Supply Chain and Logistics Engineering
  • Systems Modelling and Simulation

KEYNOTE SPEAKERS

Antonella FerraraUniversity of Pavia, Italy
John KrummUniversity of Southern California, United States
Vladimír KuceraCzech Technical University in Prague, Czech Republic

PAPER SUBMISSION

Authors can submit their work in the form of a complete paper or an abstract, but please note that accepted abstracts are presented but not published in the proceedings of the conference. Complete papers can be submitted as a Regular Paper, representing completed and validated research, or as a Position Paper, portraying a short report of work in progress or an arguable opinion about an issue discussing ideas, facts, situations, methods, procedures or results of scientific research focused on one of the conference topic areas.

Authors should submit a paper in English, carefully checked for correct grammar and spelling, addressing one or several of the conference areas or topics. Each paper should clearly indicate the nature of its technical/scientific contribution, and the problems, domains or environments to which it is applicable. To facilitate the double-blind paper evaluation method, authors are kindly requested to produce and provide the paper WITHOUT any reference to any of the authors, including the authors’ personal details, the acknowledgments section of the paper and any other reference that may disclose the authors’ identity.

When submitting a complete paper please note that only original papers should be submitted. Authors are advised to read INSTICC's ethical norms regarding plagiarism and self-plagiarism thoroughly before submitting and must make sure that their submissions do not substantially overlap work which has been published elsewhere or simultaneously submitted to a journal or another conference with proceedings. Papers that contain any form of plagiarism will be rejected without reviews.

All papers must be submitted through the online submission platform PRIMORIS and should follow the instructions and templates that can be found under Guidelines and Templates. After the paper submission has been successfully completed, authors will receive an automatic confirmation e-mail.

PUBLICATIONS

All accepted complete papers will be published in the conference proceedings, under an ISBN reference, on paper and on digital support.
SCITEPRESS is a member of CrossRef (http://www.crossref.org/) and every paper on our digital library is given a DOI (Digital Object Identifier).
The proceedings will be submitted for indexation by SCOPUS, Google Scholar, DBLP, Semantic Scholar, EI and Web of Science / Conference Proceedings Citation Index.

IMPORTANT DATES

Conference Date: 18 - 20 November, 2024

Paper Submission: June 24, 2024 (expired)
Authors Notification:
July 31, 2024 (expired)
Camera Ready and Registration:
September 13, 2024 (expired)

Paper Submission: July 24, 2024 (expired)
Authors Notification:
September 12, 2024 (expired)
Camera Ready and Registration:
September 25, 2024 (expired)

Late-Breaking

Paper Submission: September 6, 2024 (expired)
Authors Notification:
September 26, 2024 (expired)
Camera Ready and Registration:
October 7, 2024 (expired)

Workshops
Workshop Proposal: June 26, 2024 (expired)

Special Sessions
Special Session Proposal: June 26, 2024 (expired)

Tutorials
Tutorial Proposal: October 9, 2024 (expired)

Demos
Demo Proposal: October 9, 2024 (expired)

Panels
Panel Proposal: October 9, 2024 (expired)

Abstracts
Abstract Submission: October 1, 2024 (expired)
Authors Notification: October 9, 2024 (expired)
Camera Ready and Registration: October 15, 2024 (expired)

SECRETARIAT

ICINCO Secretariat
Address: Avenida de S. Francisco Xavier, Lote 7 Cv. C
             2900-616 Setúbal - Portugal
Tel.: +351 265 520 185
Fax: +351 265 520 186
e-mail: icinco.secretariat@insticc.org
Web: https://icinco.scitevents.org

VENUE

The conference will take place at the Vila Galé Porto hotel which is located in the beautiful and historical city of Porto in Portugal. Porto is considered to be one of the most beautiful historical towns in Portugal, with its remarkable architectural heritage shaped by history.

CONFERENCE CHAIR

Dimitar FilevFord Research / Texas A&M University, United States

PROGRAM CO-CHAIRS

Giuseppina Carla GiniPolitecnico di Milano, Italy
Radu-Emil PrecupPolitehnica University of Timisoara, Romania

PROGRAM COMMITTEE MEMBERS

Sherif Abdelwahed, Virginia Commonwealth University, United States
Khalid Abidi, Newcastle University Singapore, Singapore
Lounis Adouane, Université de Technologie de Compiègne, France
El-Houssaine Aghezzaf, Ghent University, Faculty of Engineering and Architecture, Belgium
Eugenio Aguirre, University of Granada, Spain
Rudy Agustriyanto, University of Surabaya, Indonesia
Mojtaba Ahmadieh Khanesar, University of Nottingham, United Kingdom
Chuadhry Mujeeb Ahmed, University of Bristol, Singapore
Manuel Aleixandre, Tokyo Institute of Technology, Japan
Erdinç Altug, Istanbul Technical University, Turkey
Mihail H. Antchev, Technical University - Sofia, Bulgaria
Rui Araujo, University of Coimbra, Portugal
Laurent Arcese, CReSTIC, University of Reims Champagne-Ardenne, France
Mohd Ashraf Ahmad, University Malaysia Pahang, Malaysia
Ralf Bachmayer, University of Bremen, Germany
Shaoping Bai, Aalborg University, Denmark
Mónica Ballesta Galdeano, Miguel Hernandez University of Elche / Engineering Research Institute (I3E), Spain
Ramiro Barbosa, ISEP/IPP - School of Engineering, Polytechnic Institute of Porto, Portugal
Michele Basso, University of Florence, Italy
Yazdan Batmani, University of Kurdistan, Iran, Islamic Republic of
Eric Baumgartner, Milwaukee School of Engineering, United States
Mahmoud BELHOCINE, CDTA, Algeria
Juri Belikov, Tallinn University of Technology, Estonia
Dominik Belter, Poznan University of Technology, Poland
Faiz Ben Amar, Sorbonne Université, France
Karsten Berns, University of Kaiserslautern-Landau, Germany
Sylvain Bertrand, ONERA - Univ. Paris-Saclay, France
Zafer Bingul, Kocaeli University, Turkey
Claudia-Adina Bojan-Dragos, Politehnica University of Timisoara, Romania
Mohammad Bozorg, Yazd University, Iran, Islamic Republic of
Jean-François Brethe, GREAH, France
Ivan Buzurovic, Harvard University, United States
Kenneth Camilleri, University of Malta, Malta
Alessandro Casavola, University of Calabria, Italy
Marco Castellani, University of Birmingham, United Kingdom
Jés Cerqueira, Universidade Federal da Bahia, Brazil
Nikhil Chopra, University of Maryland, United States
Paul Christodoulides, Cyprus University of Technology, Cyprus
Paulo Jorge Coelho, Polytechnic University of Leiria, Portugal
Michel Dambrine, Polytechnic University of Hauts-de-France, France
Paolo Di Giamberardino, Sapienza University of Rome, Italy
António Dourado, University of Coimbra, Portugal
Pawel J. Drag, Wroclaw University of Science and Technology, Poland
Marc Ebner, Ernst-Moritz-Arndt-Universität Greifswald, Germany
Sebastian Engell, Independent Researcher, Germany
Mohammed S. Fadali, UNR, United States
Baris Fidan, University of Waterloo, Canada
Alberto Finzi, University of Naples Federico II, Italy
Paolo Fiorini, University of Verona, Italy
Gerardo Flores, University of Texas at Dallas, United States
Fernando Fontes, Faculty of Engineering, University of Porto, Portugal
Thierry Fraichard, INRIA, France
Giuseppe Franzè, University of Calabria, Italy
Eduardo Oliveira Freire, Federal University of Sergipe, Brazil
Georg Frey, Automation and Energy Systems, Saarland University, Germany
Mauro Gaggero, National Research Council of Italy, Italy
Andrej Gams, Jožef Stefan Institute, Slovenia
Luís Garrote, ISR-UC, Portugal
Péter Gáspár, SZTAKI, Hungary
Mariusz Giergiel, Faculty of Mechancal Engineering and Robotics, AGH University of Krakow, Poland
Giorgio Gnecco, IMT - School for Advanced Studies - Lucca, Italy
Eduardo P. Godoy, São Paulo State University (UNESP), Brazil
Luis Gomes, Universidade Nova de Lisboa, Portugal
Gil M. Gonçalves, Faculty of Engineering of the University of Porto, Portugal
Lech Grzesiak, Warsaw University of Technology, Poland
Prof. Rajeev Gupta, Rajasthan Technical University, India
Maki Habib, The American University in Cairo, Egypt
Kensuke Harada, Osaka University, Japan
Khalifa H. Harib, UAE University, United Arab Emirates
Sallehuddin Haris, Universiti Kebangsaan Malaysia, Malaysia
David Hästbacka, Tampere University, Finland
Ramdane Hedjar, King Saud University, Saudi Arabia
Chiu-Fan Hsieh, National Formosa University, Taiwan, Republic of China
Daniela Iacoviello, Sapienza University of Rome, Italy
Mohd Faisal Ibrahim, National University of Malaysia, Malaysia
Gianluca Ippoliti, Università Politecnica delle Marche, Italy
Addie Irawan, Universiti Malaysia Pahang Al-Sultan Abdullah, Malaysia
Sarangapani Jagannathan, Missouri University of Science and Technology, United States
Aleš Janota, Faculty of Electrical Engineering and Information Technology, University of Zilina, Slovak Republic
Isabel Jesus, ISEP/IPP - School of Engineering, Polytechnic Institute of Porto, Portugal
Nicolas Jouandeau, Paris 8 University, France
Fabrício Junqueira, University of São Paulo (USP), Brazil
Tohru Kawabe, University of Tsukuba, Japan
Balint Kiss, Budapest University of Technology and Economics, Hungary
Moharram H. Korayem, Robotic Research Lab, Mechanical Engineering Department, Iran University of Science and Technology, Iran, Islamic Republic of
Peter Košťál, Slovenská Technická Univerzita v Bratislave, Slovak Republic
Constantine Kotropoulos, Aristotle Univ. of Thessaloniki, Greece
Marek Kraft, Poznan University of Technology, Poland
Masao Kubo, Narional Defense Academy of Japan, Japan
Haluk Kucuk, Lake Superior State University, United States
Kolja Kühnlenz, Coburg University of Applied Sciences and Arts, Germany
Miroslav Kulich, Czech Technical University in Prague, Czech Republic
Sébastien Lahaye, Istia - LARIS, France
Fabian Andres Lara-Molina, Federal University of Triângulo Mineiro, Brazil
Sukhan Lee, Sungkyunkwan University, Korea, Republic of
Fátima S. Leite, University of Coimbra, Portugal
Kauko Leiviskä, University of Oulu, Finland
Yangmin Li, ISE, Hong Kong Polytechnic University, Hong Kong
Gordon Lightbody, University College Cork, Ireland
Hichem Maaref, Universite d'EVRY-IUT, France
André Maitelli, Federal University of Rio Grande Do Norte, Brazil
Om Malik, University of Calgary, Canada
Federico Mari, University of Rome Foro Italico, Italy
Antonio Marin-Hernandez, Universidad Veracruzana, Mexico
Ester Martinez-Martin, University of Alicante, Spain
Pavlo Maruschak, Ternopil National Ivan Puluj Technical University, Ukraine
Julien Marzat, DTIS, ONERA, Université Paris Saclay, France
Luca Mazzola, HSLU - Lucerne University of Applied Sciences, Switzerland
Ken McGarry, School of Computing, University of Sunderland, United Kingdom
Seán McLoone, Queen's Unviersity Belfast, Ireland
Mahanijah Md Kamal, Universiti Teknologi MARA, Malaysia
Paulo Miyagi, University of Sao Paulo, Brazil
Héctor Montes, Technological University of Panama, Panama
Nicolás Montés, University CEU Cardenal Herrera, Spain
Rafael Morales, University of Castilla La Mancha, Spain
Juan J. Nieto, University of Santiago de Compostela, Spain
Shimon Y. Nof, Purdue University, United States
Urbano J. Nunes, University of Coimbra / Inst. of Systems and Robotics, Portugal
Andrzej Obuchowicz, University of Zielona Góra, Poland
Stamatios Papadakis, Department of Preschool Education, University of Crete, Greece
Ju H. Park, Yeungnam University, Korea, Republic of
Igor Paromtchik, Robotic Technologies, France
Tejaswin Parthasarathy, University of Illinois at Urbana Champaign, United States
Krzysztof Patan, University of Zielona Gora, Poland
Mukesh D. Patil, Electronics and Telecommunication, Ramrao Adik Institute of Technology, India
Dariusz Pazderski, Poznan University of Technology, Poland
Adrian Peidro, Miguel Hernandez University, Spain
Qingjin Peng, University of Manitoba, Canada
Milica M. Petrovic, Faculty of Mechanical Engineering, University of Belgrade, Serbia
Alexandre Philippot, University of Reims Champagen Ardenne, France
Roel Pieters, Independent Researcher, Finland
Gema Piñero, Universitat Politècnica de València, Spain
Mark Post, The University of York, United Kingdom
Mohd Syakirin Ramli, Universiti Malaysia Pahang Al Sultan Abdullah, Malaysia
Oscar Reinoso, Miguel Hernandez University, Spain
Francisco Restivo, Universidade do Porto, Portugal
Bernard Riera, University of Reims Champagne-Ardenne, France
Gerasimos Rigatos, Industrial Systems Institute, Greece
Alejandro Rodriguez-Angeles, Cinvestav-IPN, Mexico
Olympia Roeva, Institute of Biophysics and Biomedical Engineering, Bulgarian Academy of Sciences, Bulgaria
Raul-Cristian Roman, Politehnica University of Timisoara, Romania
Juha Röning, University of Oulu, Finland
Christophe Sabourin, Univ. Paris Est Creteil, LISSI, France
Soroush Sadeghnejad, Amirkabir University of Technology, Iran, Islamic Republic of
Antonio Sala, Universitat Politecnica de Valencia, Spain
Addisson Salazar, Universitat Politècnica de València, Spain
Jorge Sales, Jaume I University, Spain
Javier Sanchis, Universitat Politècnica de València, Spain
Karol Seweryn, Space Research Centre (CBK PAN), Poland
Madhavan Shanmugavel, Mechatronics Engineering, SRM Institute of Science and Technology, India
Jinhua She, Tokyo University of Technology, Japan
Michael Short, Teesside University, United Kingdom
Manuel Silva, ISEP-Instituto Superior de Engenharia do Porto, Portugal
Vasile Sima, Technical Sciences Academy of Romania, Romania
Azura Che Soh, Universiti Putra Malaysia, Malaysia
Adrian-Mihail Stoica, Polytechnic University Bucharest, Romania
Olaf Stursberg, University of Kassel, Germany
Tomasz Tarczewski, Nicolaus Copernicus University, Poland
Francesco Tedesco, University of Calabria, Italy
Daniel Thalmann, Ecole Polytechnique Federale de Lausanne, Switzerland
Germano Torres, PS Solutions, Brazil
Enrico Tronci, Universita' Di Roma "la Sapienza", Italy
José Valente de Oliveira, Faculdade de Ciências e Tecnologia, DEEI, Universidade do Algarve, Portugal
Angel Valera, Universidad Politécnica de Valencia, Spain
Yolanda Vidal, Universitat Politecnica de Catalunya, Spain
Alexey Vinel, KIT, Germany
Kostas Vlachos, University of Ioannina, Greece
Constantin Volosencu, Politehnica University Timisoara, Romania
Damir Vrancic, Jožef Stefan Institute, Slovenia
A. Mehmet Yüceer, Inoenue University, Turkey
Jie Zhang, Newcastle University, United Kingdom
Cezary Zielinski, Warsaw University of Technology, Poland

(list not yet complete)

footer