Banner
Home      Log In      Contacts      FAQs      INSTICC Portal
 
Documents

Call for Papers

ICINCO is sponsored by INSTICC – Institute for Systems and Technologies of Information, Control and Communication

SCOPE

The purpose of the 11th International Conference on Informatics in Control, Automation and Robotics (ICINCO) is to bring together researchers, engineers and practitioners interested in the application of informatics to Control, Automation and Robotics. Four simultaneous tracks will be held, covering Intelligent Control Systems, Optimization, Robotics, Automation, Signal Processing, Sensors, Systems Modelling and Control, and Industrial Engineering, Production and Management.
Informatics applications are pervasive in many areas of Control, Automation and Robotics; This conference intends to emphasize this connection, therefore, authors should highlight the benefits of Information Technology (IT) in these areas. Ideas on how to solve problems using IT, both in R&D and industrial applications, are welcome. Papers describing advanced prototypes, systems, tools and techniques and general survey papers indicating future directions are also encouraged. Papers describing original work are invited in any of the areas listed below. Accepted papers, presented at the conference by one of the authors, will be published in the Proceedings of ICINCO, with an ISBN. Acceptance will be based on quality, relevance and originality. Both full research reports and work-in-progress reports are welcome. There will be both oral and poster sessions.
Special sessions, dedicated to case-studies and commercial presentations, as well as tutorials dedicated to technical/scientific topics are also envisaged: companies interested in presenting their products/methodologies or researchers interested in holding a tutorial, workshop or special session are invited to contact the conference secretariat or visit the conference website.

CONFERENCE AREAS

Avaliable soon.

KEYNOTE SPEAKERS

Angel Del PobilUniversitat Jaume I, Spain
Christoph StillerKarlsruhe Institute of Technology (KIT), Germany
Karsten BernsUniversity of Kaiserslautern-Landau, Germany
Riccardo CassinisUniversity of Brescia, Italy
Len GelmanCranfield University, United Kingdom

PAPER SUBMISSION

Authors should submit a paper in English, carefully checked for correct grammar and spelling, addressing one or several of the conference areas or topics. Each paper should clearly indicate the nature of its technical/scientific contribution, and the problems, domains or environments to which it is applicable. To facilitate the double-blind paper evaluation method, authors are kindly requested to produce and provide the paper WITHOUT any reference to any of the authors, including the authors’ personal details, the acknowledgments section of the paper and any other reference that may disclose the authors’ identity.

Only original papers should be submitted. Authors are advised to read INSTICC's ethical norms regarding plagiarism and self-plagiarism thoroughly before submitting and must make sure that their submissions do not substantially overlap work which has been published elsewhere or simultaneously submitted to a journal or another conference with proceedings. Papers that contain any form of plagiarism will be rejected without reviews.

Authors can submit their work in the form of a Regular Paper, representing completed and validated research, or as a Position Paper, portraying a short report of work in progress or an arguable opinion about an issue discussing ideas, facts, situations, methods, procedures or results of scientific research focused on one of the conference topic areas. All papers must be submitted through the online submission platform PRIMORIS and should follow the instructions and templates that can be found under Guidelines and Templates. After the paper submission has been successfully completed, authors will receive an automatic confirmation e-mail.

PUBLICATIONS

All accepted papers will be published in the conference proceedings, under an ISBN reference, on paper and on digital support.
SCITEPRESS is a member of CrossRef (http://www.crossref.org/) and every paper on our digital library is given a DOI (Digital Object Identifier).
All papers presented at the conference venue will be available at the SCITEPRESS Digital Library.
A short list of presented papers will be selected so that revised and extended versions of these papers will be published by Springer-Verlag in a LNEE Series book.
The proceedings will be submitted for indexation by .

SECRETARIAT

ICINCO Secretariat
Address: Av. D. Manuel I, 27A, 2º esq.
             2910-595 Setubal - Portugal
Tel.: +351 265 520 185
Fax: +44 203 014 8813
e-mail: icinco.secretariat@insticc.org
Web: https://icinco.scitevents.org

CONFERENCE CHAIR

Joaquim FilipePolytechnic Institute of Setubal / INSTICC, Portugal

PROGRAM CO-CHAIRS

Oleg GusikhinFord Motor Company, United States
Kurosh MadaniUniversity of Paris-EST Créteil (UPEC), France
Jurek SasiadekCarleton University, Canada

PROGRAM COMMITTEE MEMBERS

Andrew Adamatzky, University of the West of England, United Kingdom
El-Houssaine Aghezzaf, Ghent University, Faculty of Engineering and Architecture, Belgium
Eugenio Aguirre, University of Granada, Spain
Adel Al-Jumaily, University of Technology Sydney, Australia
Frank Allgower, Institute for Systems Theory and Automatic Control, University of Stuttgart, Germany
Fouad Al-Sunni, Independent Researcher, Saudi Arabia
Yacine Amirat, University Paris Est Créteil (UPEC), France
Nicolas Andreff, Femto-ST Institute, France
Stefan Andrei, Lamar University, United States
Marcelo Ang, , Singapore
Rui Araujo, University of Coimbra, Portugal
Helder Araújo, University of Coimbra, Portugal
Tomas Arredondo, Universidad Tecnica Federico Santa Maria, Chile
Vijanth Sagayan Asirvadam, Universiti Teknologi PETRONAS, Malaysia
T. Asokan, Indian Institute of Technology Madras, India
Nikos Aspragathos, University of Patras, Greece
M. Amine Atoui, UBS, France
Ruzena Bajcsy, University of California Berkeley, United States
S. Balakrishnan, Missouri University of Science and Technology, United States
Ruth Bars, Budapest University of Technology and Economics, Hungary
Johannes Baumgartl, University of Bayreuth, Germany
Victor Becerra, University of Reading, United Kingdom
Laxmidhar Behera, Indian Institute of Technology, Kanpur, India
Carsten Behn, Schmalkalden University of Applied Sciences, Germany
Philippe Bidaud, University Paris 6, France
Mauro Birattari, Université Libre de Bruxelles, Belgium
Hannes Bleuler, EPFL Lausanne, Switzerland
Christian Blum, IKERBASQUE and University of the Basque Country, Spain
Jean-Louis Boimond, ISTIA - LARIS, France
Magnus Boman, The Royal Institute of Technology, Sweden
Robert Brennan, University of Calgary, Canada
Glen Bright, University of KwaZulu-Natal, South Africa
Marvin Bugeja, University of Malta, Malta
Edmund Burke, University of Nottingham, United Kingdom
Kevin Burn, University of Sunderland, United Kingdom
Amaury Caballero, Florida International University, United States
Eduardo Camacho, University of Seville, Spain
Kenneth Camilleri, University of Malta, Malta
Giuseppe Carbone, Università della Calabria, Italy
Alessandro Casavola, University of Calabria, Italy
Pei-Chann Chang, Yuan Ze University, Taiwan, Republic of China
Yuh-Min Chen, National Cheng Kung University, Taiwan, Republic of China
Yangquan Chen, Utah State University, United States
Albert Cheng, University of Houston, United States
Xu Cheng, Independent Researcher, United States
Tsung-Che Chiang, National Taiwan Normal University, Taiwan, Republic of China
Sung-Bae Cho, Yonsei University, Korea, Republic of
Prabhas Chongstitvatana, Chulalongkorn University, Thailand
Ryszard S. Choras, UTP University of Sciences and Technology, Poland
Chengbin Chu, ESIEE Paris, Université Paris-Est, France
Daisuke Chugo, Kwansei Gakuin University, Japan
Carlos Coello Coello, CINVESTAV-IPN, Mexico
Sesh Commuri, The University of Oklahoma, United States
Shuang Cong, University of Science and Technology of China, China
James M. Conrad, University of North Carolina at Charlotte, United States
Hugo Costelha, Polytechnic Institute of Leiria, Portugal
Yechiel Crispin, Embry-riddle Aeronautical University, United States
José Boaventura Cunha, University of Trás-os-montes and Alto Douro, Portugal
Fabrizio Dabbene, Independent Researcher, Italy
Matthew Dailey, Asian Institute of Technology, Thailand
Prithviraj (Raj) Dasgupta, University of Nebraska, United States
Joshua Dayan, Technion – Israel Institute of Technology, Israel
Kamil Dedecius, Independent Researcher, Czech Republic
Kyriakos Deliparaschos, Cyprus University of Technology, Cyprus
Mingcong Deng, Tokyo University of Agriculture and Technology, Japan
Guilherme DeSouza, University of Missouri, United States
Rüdiger Dillmann, Karlsruhe Institute of Technology - KIT, Germany
Alexandre Dolgui, IMT Atlantique, France
Xingye Dong, Beijing Jiaotong University, China
António Dourado, University of Coimbra, Portugal
Venky Dubey, Bournemouth University, United Kingdom
Ioan Dumitrache, University “POLITEHNICA” of Bucharest, Romania
Ashish Dutta, Indian Institute of Technology Kanpur, India
Vaclav Dvorak, Brno University of Technology, Czech Republic
Marc Ebner, Ernst-Moritz-Arndt-Universität Greifswald, Germany
Petr Ekel, Pontifical Catholic University of Minas Gerais, Brazil
Mohammed El-Abd, American University of Kuwait, Kuwait
Simon G. Fabri, University of Malta, Malta
Javier Fernandez de Canete, University of Malaga, Spain
David Fernández-Llorca, University of Alcalá, Spain
Manuel Ferre Perez, Universidad Politecnica Madrid, Spain
Rolf Findeisen, Control and Cyber-Physical Systems Laboratory, TU Darmstadt, Germany
Paolo Fiorini, University of Verona, Italy
Juan J. Flores, University of Michoacan, Mexico
Mauro Franceschelli, Università di Cagliari, Italy
Heinz Frank, Independent Researcher, Germany
Georg Frey, Automation and Energy Systems, Saarland University, Germany
Antonio Frisoli, PERCRO Laboratory, Scuola Superiore Sant’Anna, Italy
Emanuele Frontoni, Marche Polytechnic University, Italy
Toyomi Fujita, Tohoku Institute of Technology, Japan
Toshio Fukuda, Nagoya University, Japan
Luiz Carlos Gadelha, Independent Researcher, Brazil
Cipriano Galindo, University of Malaga, Spain
John Qiang Gan, University of Essex, United Kingdom
Maria I. Garcia-Planas, Universitat Politecnica de Catalunya, Spain
Ryszard Gessing, Silesian University of Technology, Poland
Lazea Gheorghe, Technical University of Cluj-Napoca, Romania
Wojciech Giernacki, Poznan University of Technology/ Institute of Control, Robotics and Information Engineering, Poland
Paulo Gil, Universidade Nova de Lisboa, Portugal
Maria Gini, University of Minnesota, United States
Giuseppina Carla Gini, Politecnico di Milano, Italy
Luis Gomes, Universidade Nova de Lisboa, Portugal
Arthur Gómez, Universidade do Vale do Rio dos Sinos, Brazil
Bhaskaran Gopalakrishnan, West Virginia University, United States
Irene Gregory, NASA Langley Research Center, United States
Lucian Teodor Grigorie, Military Technical Academy ''Ferdinand I'', Bucharest, Romania
Frans C. A. Groen, University of Amsterdam, Netherlands
Lech Grzesiak, Warsaw University of Technology, Poland
Guoxiang Gu, Louisiana State University, United States
Jason Gu, Dalhousie University, Canada
Martin Guay, Queen´s University, Canada
Kevin Guelton, University of Reims Champagne-Ardenne, France
José J. Guerrero, Universidad de Zaragoza, Spain
Roman Gumzej, University of Maribor, Slovenia
Thomas Gustafsson, Luleå University of Technology, Sweden
Maki Habib, The American University in Cairo, Egypt
Jörg Hähner, Universität Augsburg, Germany
Wolfgang Halang, Qingdao University of Science and Technology, China
Riad I. Hammoud, Independent Researcher, United States
Kensuke Harada, Osaka University, Japan
Jennifer Harding, Loughborough University, United Kingdom
John Harris, University of Florida, United States
Inman Harvey, University of Sussex, United Kingdom
Kenji Hashimoto, Waseda University, Japan
Dominik Henrich, University of Bayreuth, Germany
Arturo Hernández - Aguirre, Centre for Research in Mathematics, Mexico
Suranga Hettiarachchi, Indiana University Southeast, United States
Mitsuru Higashimori, Osaka University, Japan
Diana Hintea, Coventry University, United Kingdom
Yasuhisa Hirata, Tohoku University, Japan
Kaoru Hirota, Tokyo Institute of Technology, Japan
Mathieu Hobon, CEATech Lorraine, France
Wladyslaw Homenda, Warsaw University of Technology, Poland
Guoqiang Hu, Nanyang Technological University, Singapore
Gianluca Ippoliti, Università Politecnica delle Marche, Italy
Mircea Ivanescu, University of Craiova, Romania
Sarangapani Jagannathan, Missouri University of Science and Technology, United States
Thira Jearsiripongkul, Thammasat University, Thailand
Michael Jenkin, York University, Canada
Myong K. Jeong, Rutgers University, United States
Wootae Jeong, Korea Railroad Research Institute, Korea, Republic of
Qing-Shan Qing-Shan Jia, Tsinghua University, China
Michail Kalogiannakis, University of Thessaly, Greece
Mansour Karkoub, Texas A&M Universiy, Qatar
Dimitrios Karras, Sterea Hellas Institute of Technology, Greece
Fakhri Karray, University of Waterloo, Canada
Dusko Katic, Mihailo Pupin Institute, Serbia
Tohru Kawabe, University of Tsukuba, Japan
Graham Kendall, University of Nottingham Malaysia Campus, Malaysia
Wisama Khalil, Ecole Centrale de Nantes, IRCCyN, France
Farshad Khorrami, ECE Dept., , United States
Kazuo Kiguchi, Kyushu University, Japan
Won-Jong Kim, Texas A&M University, United States
Jonghwa Kim, University of Science & Technology, Korea, Republic of
DaeEun Kim, Yonsei University, Korea, Republic of
Sarath Kodagoda, University of Technology Sydney, Australia
Peter Kopacek, Vienna University of Technology, Austria
Israel Koren, University of Massachusetts, United States
George L. Kovács, Hungarian Academy of Sciences, Hungary
Krzysztof Kozlowski, Poznan University of Technology, Poland
Ondrej Krejcar, University of Hradec Kralove, Czech Republic
Daniel Kressner, Independent Researcher, Switzerland
Mianowski Krzysztof, Politechnika Warszawska, Poland
Masao Kubo, Narional Defense Academy of Japan, Japan
Kolja Kühnlenz, Coburg University of Applied Sciences and Arts, Germany
Yoshifumi Kuriyama, Independent Researcher, Japan
Nikolay Vladimirovich Kuznetsov, Saint-Petersburg State University, Russian Federation
Dong-Soo Kwon, KAIST, Korea, Republic of
Sébastien Lahaye, Istia - LARIS, France
Kin Keung Lai, City University of Hong Kong, Hong Kong
H. K. Lam, King's College London, United Kingdom
Graham Leedham, University of New England, Australia
Kauko Leiviskä, University of Oulu, Finland
Gennady Leonov, Independent Researcher, Russian Federation
Yangmin Li, The Hong Kong Polytechnic University, Hong Kong
Tsai-Yen Li, National Chengchi University, Taiwan, Republic of China
Kang Li, Queen's University Belfast, United Kingdom
Gordon Lightbody, University College Cork, Ireland
Veronique Limère, Ghent University, Belgium
Huei-Yung Lin, National Taipei University of Technology, Taiwan, Republic of China
Guoping Liu, University of South Wales, United Kingdom
Changchun Liu, , United States
Xiaoping Liu, Carleton University, Canada
Honghai Liu, School of Creative Technologies, University of Portsmouth, United Kingdom
Luís Seabra Lopes, University of Aveiro, Portugal
Sérgio F. Lopes, University of Minho, Portugal
Gonzalo Lopez-Nicolas, Universidad de Zaragoza, Spain
Iuan-Yuan Lu, National Sun Yat-sen University, Taiwan, Republic of China
Edwin Lughofer, Johannes Kepler University, Austria
Martin Lukac, Nazarbayev University, Kazakhstan
José Tenreiro Machado, Institute of Engineering, Polytechnic of Porto, Portugal
Anthony A Maciejewski, Colorado State University, United States
Ana Madureira, ISEP/IPP, Portugal
Gianantonio Magnani, Politecnico di Milano, Italy
Nitaigour Mahalik, California State University - Fresno, United States
Magdi S. Mahmoud, King Fahd University of Petroleum and Minerals, Saudi Arabia
Frederic Maire, Queensland University of Technology, Australia
Om Malik, University of Calgary, Canada
Stamatis Manesis, University of Patras, Greece
Fabio Marchese, Università degli Studi di Milano-Bicocca, Italy
Philippe Martinet, INRIA, France
Aníbal Matos, Faculdade de Engenharia da Universidade do Porto (FEUP), Portugal
Leonardo Mattos, Independent Researcher, Italy
Rene V. Mayorga, University of Regina, Canada
Alicja Mazur, Wroclaw University of Technology, Poland
Ross McAree, University of Queensland, Australia
Seán McLoone, Queen's Unviersity Belfast, Ireland
Joaquim Melendez, University of Girona, Spain
Luis Merino, Pablo de Olavide University, Spain
Konstantinos Michail, Cyprus University of Technology, Cyprus
Patrick Millot, University of Valenciennes, France
Sara Moein, Mount Sinai School of Medicine, United States
Masoud Mohammadian, University of Canberra, Australia
S. Ali A. Moosavian, Independent Researcher, Iran, Islamic Republic of
Ruben Morales-Menendez, Tecnologico de Monterrey, Mexico
António Paulo Moreira, Independent Researcher, Portugal
Vladimir Mostyn, VSB - Technical University of Ostrava, Czech Republic
Mario Munich, Independent Researcher, United States
Riccardo Muradore, University of Verona, Italy
Ana Cristina Murillo, University of Zaragoza, Spain
Arjun Nagendran, IST, , United States
Zoltan Nagy, Loughborough University, United Kingdom
Saeid Nahavandi, Deakin University, Australia
Andreas Nearchou, University of Patras, Greece
Sergiu Nedevschi, Technical University of Cluj-Napoca, Romania
Nadia Nedjah, Independent Researcher, Brazil
Robert W. Newcomb, University of Maryland, United States
Henk Nijmeijer, Eindhoven University of Technology, Netherlands
George Nikolakopoulos, Luleå University of Technology, Sweden
Juan A. Nolazco-Flores, Independent Researcher, Mexico
Celestine Ntuen, North Carolina A&T State University, United States
Osamu Ono, Meiji University, Japan
Yongsheng Ou, Shenzhen Inst. of Advanced Tech., China
Erhan Oztop, Ozyegin University, Turkey
Lei Pan, Southeast University, China
Gordon Parker, Michigan Technological University, United States
Igor Paromtchik, Robotic Technologies, France
Pierre Payeur, University of Ottawa, Canada
Witold Pedrycz, University of Alberta, Canada
D. T. Pham, The University of Birmingham, United Kingdom
Jeff Pieper, University of Calgary, Canada
S. G. Ponnambalam, University Malaysia Pahang, Malaysia
Marie-Noëlle Pons, Lab. Chemical. Engineering Sciences, , France
Nirvana Popescu, University Politehnica of Bucharest, Romania
Raul Marin Prades, Jaume I University, Spain
Radu-Emil Precup, Politehnica University of Timisoara, Romania
Libor Preucil, Czech Technical University in Prague, Czech Republic
Ahmad B. Rad, Simon Fraser University, Canada
José Ragot, Centre de Recherche en Automatique de Nancy, France
Oscar Reinoso, Miguel Hernandez University, Spain
Cameron Riviere, Carnegie Mellon University, United States
Juha Röning, University of Oulu, Finland
Mehdi Roopaei, University of Texas at San Antonio, United States
Agostinho Rosa, ISR - Instituto de Sistemas e Robótica, Portugal
João Mauricio Rosário, University of Campinas, Brazil
António Ruano, University of Algarve, Portugal
Carlos Sagüés, Universidad de Zaragoza, Spain
Mehmet Sahinkaya, Kingston University London, United Kingdom
Priti Srinivas Sajja, Sardar Patel University, India
Antonio Sala, Universitat Politecnica de Valencia, Spain
Marcello Sanguineti, University of Genoa, Italy
Nilanjan Sarkar, Vanderbilt University, United States
Hideyuki Sawada, Waseda University, Japan
Klaus Schilling, University Würzburg, Germany
Daniel Schmidt, SEW EURODRIVE GmbH, Germany
Carla Seatzu, University of Cagliari, Italy
Gerald Seet, Nanyang Technological University , Singapore
Ali Selamat, Universiti Teknologi Malaysia, Malaysia
João Sequeira, Instituto Superior Técnico, Portugal
Roman Sergienko, Gini GmbH, Germany
Moshe Shoham, Technion - Israel Institute of Technology, Israel
Michael Short, Teesside University, United Kingdom
Basilio Sierra, University of the Basque Country, Spain
Vasile Sima, Technical Sciences Academy of Romania, Romania
Dan Simon, Cleveland State University, United States
Adam Slowik, Koszalin University of Technology, Poland
Jorge Solis, Karlstad University / Waseda University, Sweden
Qing Song, Nanyang Technological University, Singapore
Safeeullah Soomro, AMA International University , Bahrain
Stefano Squartini, Università Politecnica delle Marche, Italy
Burkhard Stadlmann, Upper Austria University of Applied Sciences, Wels, Austria
Sergiu Stan, Technical University of Cluj-Napoca, Romania
J. D. Stigter, Wageningen University, Netherlands
Olaf Stursberg, University of Kassel, Germany
Raúl Suárez, Universitat Politecnica de Catalunya (UPC), Spain
Il Hong Suh, Hanyang University, Korea, Republic of
Jian Sun, Beijing Institute of Technology, China
Katia Sycara, Carnegie Mellon University, United States
Kazuhiko Takahashi, Doshisha University, Japan
Abdelhamid Tayebi, Lakehead University, Canada
Daniel Thalmann, Ecole Polytechnique Federale de Lausanne, Switzerland
Simon Thompson, AIST, Japan
Gui Yun Tian, Newcastle University, United Kingdom
Sven Tomforde, Intelligent Embedded Systems Group, University of Kassel, Germany
N. G. Tsagarakis, Independent Researcher, Italy
Wa-Muzemba Anselme Tshibangu, Morgan State University, United States
Avgoustos Tsinakos, University of Kavala Institute of Technology / Athabasca University of Canada, Greece
Antonios Tsourdos, Cranfield University, United Kingdom
Nikos Tsourveloudis, Technical University of Crete, Greece
Takashi Tsubouchi, University of Tsukuba, Japan
Ali Emre Turgut, Middle East Technical University, Turkey
Ivan Tyukin, Department of Mathematics, University of Leicester, United Kingdom
José Valente de Oliveira, Faculdade de Ciências e Tecnologia, DEEI, Universidade do Algarve, Portugal
Angel Valera, Universidad Politécnica de Valencia, Spain
A. Frank Van Der Stappen, Utrecht University, Netherlands
Hendrik Van Landeghem, Ghent University, Belgium
Bram Vanderborght, Vrije Universiteit Brussel, Belgium
Ramiro Velazquez, Universidad Panamericana, Mexico
Federico Vicentini, Independent Researcher, Italy
Ljubo Vlacic, Griffith University, Australia
Damir Vrancic, Jožef Stefan Institute, Slovenia
Bernardo Wagner, Leibniz Universität Hannover, Germany
Zidong Wang, Brunel University, United Kingdom
Long Wang, Peking University, China
Michael Yu Wang, The Chinese University of Hong Kong, Hong Kong
Sangchul Won, Pohang University of Science and Technology, Korea, Republic of
Yoke San Wong, Mechanical Engineering, , Singapore
Heinz Worn, KIT - Karlsruhe Institute for Technology, Germany
Lihua Xie, Independent Researcher, Singapore
Xun W. Xu, University of Auckland, New Zealand
Gang Yao, Shanghai Maritime University, China
Bin Yao, Purdue University, United States
Tansel Yucelen, Missouri University of Science and Technology, United States
Marek Zaremba, Université du Québec (UQO), Canada
Massimiliano Zecca, Loughborough University, United Kingdom
Wei Xing Zheng, University of Western Sydney, Australia
Man Zhihong, Swinburne University of Technology, Australia
Primo Zingaretti, Università Politecnica delle Marche, Italy
Loredana Zollo, Università Campus Bio-Medico, Italy
Enrique Zuazua, BCAM - Basque Center for Applied Mathematics, Spain
Hans Zwart, University of Twente, Netherlands

footer