Banner
Home      Log In      Contacts      FAQs      INSTICC Portal
 
Documents

Call for Papers

ICINCO is sponsored by INSTICC – Institute for Systems and Technologies of Information, Control and Communication

SCOPE

The purpose of the International Conference on Informatics in Control, Automation and Robotics (ICINCO) is to bring together researchers, engineers and practitioners interested in the application of informatics to Control, Automation and Robotics. Four simultaneous tracks will be held, covering Intelligent Control Systems, Optimization, Robotics, Automation, Signal Processing, Sensors, Systems Modelling and Control, and Industrial Informatics.

Informatics applications are pervasive in many areas of Control, Automation and Robotics; This conference intends to emphasize this connection, therefore, authors should highlight the benefits of Information Technology (IT) in these areas. Ideas on how to solve problems using IT, both in R&D and industrial applications, are welcome. Papers describing advanced prototypes, systems, tools and techniques and general survey papers indicating future directions are also encouraged. Papers describing original work are invited in any of the areas listed below. Accepted papers, presented at the conference by one of the authors, will be published in the Proceedings of ICINCO, with an ISBN. Acceptance will be based on quality, relevance and originality. Both full research reports and work-in-progress reports are welcome. There will be both oral and poster sessions.

Special sessions, dedicated to case-studies and commercial presentations, as well as tutorials dedicated to technical/scientific topics are also envisaged: companies interested in presenting their products/methodologies or researchers interested in holding a tutorial, workshop or special session are invited to contact the conference secretariat or visit the conference website.

CONFERENCE AREAS

Each of these topic areas is expanded below but the sub-topics list is not exhaustive. Papers may address one or more of the listed sub-topics, although authors should not feel limited by them. Unlisted but related sub-topics are also acceptable, provided they fit in one of the following main topic areas:

1. INTELLIGENT CONTROL SYSTEMS AND OPTIMIZATION
2. ROBOTICS AND AUTOMATION
3. SIGNAL PROCESSING, SENSORS, SYSTEMS MODELLING AND CONTROL
4. INDUSTRIAL INFORMATICS


AREA 1: INTELLIGENT CONTROL SYSTEMS AND OPTIMIZATION


  • Data Based Control and AI
  • Decision Support Systems
  • Distributed Control Systems
  • Engineering Applications on Intelligent Control Systems and Optimization
  • Evolutionary Computation and Control
  • Fuzzy Control
  • Genetic Algorithms
  • Hybrid Learning Systems
  • Hybrid Systems
  • Intelligent Fault Detection, Diagnosis and Prognostics
  • Knowledge-Based Systems Applications
  • Mechatronics Systems
  • Machine Learning in Control Applications
  • Networked Control
  • Neural Networks Based Control Systems
  • Optimization Algorithms
  • Planning and Scheduling
  • Soft Computing
  • Software Agents for Intelligent Control Systems

AREA 2: ROBOTICS AND AUTOMATION


  • Autonomous Agents
  • Cognitive Approach for Robotics
  • Collective and Social Robots
  • Control and Supervision Systems
  • Drones and Internet of Things for Surveillance
  • Engineering Applications on Robotics and Automation
  • Guidance, Navigation and Control
  • Human-Machine Interfaces
  • Humanoid Robots
  • Human-Robots Interfaces
  • Image Processing
  • Industrial Networks and Automation
  • Robots for Cleaning and Disinfection
  • Intelligent Transportation Technologies and Systems
  • Mobile Robots and Intelligent Autonomous Systems
  • Modelling, Simulation and Architecture
  • Network Robotics
  • Perception and Awareness
  • Robot Design, Development and Control
  • Space and Underwater Robots
  • Soft Robotics
  • Surveillance, Fault Detection and Diagnosis
  • Telerobotics and Teleoperation
  • Vehicle Control Applications
  • Virtual Environment, Virtual and Augmented Reality
  • Vision, Recognition and Reconstruction
  • Wearable Robotics for Assistance and Rehabilitation

AREA 3: SIGNAL PROCESSING, SENSORS, SYSTEMS MODELLING AND CONTROL


  • Adaptive Signal Processing and Control
  • Biologically Inspired Sensors and Controllers
  • Defect and Change Detection and Identification
  • Engineering Applications
  • Information-Based Models for Control
  • Intelligent Components for Control
  • Mechanical, Force and Tactile Sensors
  • Modelling, Analysis and Control of Discrete-Event Systems
  • Modelling, Analysis and Control of Hybrid Dynamical Systems
  • Nonlinear Signals and Systems
  • Optimization Problems in Signal Processing
  • Processing Biological Signals
  • Real-Time Systems Control
  • Sensors Fusion
  • Signal Reconstruction
  • System Identification
  • System Modelling
  • Time-Frequency Analysis

AREA 4: INDUSTRIAL INFORMATICS


  • Computer-Based Manufacturing Technologies
  • Digital Twins
  • Energy Efficiency and Green Manufacturing
  • Human Factors & Human-System Interface
  • Industrial Automation and Robotics
  • Industrial Internet of Things and Sensor Networks
  • Intelligent Design and Manufacturing
  • Manufacturing Systems Engineering
  • Performance Evaluation and Optimization
  • Precision Engineering
  • Production Planning, Management and Control
  • Quality Control and Management
  • Resources and Knowledge Management in Industry
  • Supply Chain and Logistics Engineering
  • Systems Modelling and Simulation

KEYNOTE SPEAKERS

Shie MannorTechnion - Israel Institute of Technology, Israel
Soon-Jo ChungCalifornia Institute of Technology, United States
Panagiotis TsiotrasGeorgia Institute of Technology, United States
Emilia FridmanTel Aviv University, Israel

PAPER SUBMISSION

Authors can submit their work in the form of a complete paper or an abstract, but please note that accepted abstracts are presented but not published in the proceedings of the conference. Complete papers can be submitted as a Regular Paper, representing completed and validated research, or as a Position Paper, portraying a short report of work in progress or an arguable opinion about an issue discussing ideas, facts, situations, methods, procedures or results of scientific research focused on one of the conference topic areas.

Authors should submit a paper in English, carefully checked for correct grammar and spelling, addressing one or several of the conference areas or topics. Each paper should clearly indicate the nature of its technical/scientific contribution, and the problems, domains or environments to which it is applicable. To facilitate the double-blind paper evaluation method, authors are kindly requested to produce and provide the paper WITHOUT any reference to any of the authors, including the authors’ personal details, the acknowledgments section of the paper and any other reference that may disclose the authors’ identity.

When submitting a complete paper please note that only original papers should be submitted. Authors are advised to read INSTICC's ethical norms regarding plagiarism and self-plagiarism thoroughly before submitting and must make sure that their submissions do not substantially overlap work which has been published elsewhere or simultaneously submitted to a journal or another conference with proceedings. Papers that contain any form of plagiarism will be rejected without reviews.

All papers must be submitted through the online submission platform PRIMORIS and should follow the instructions and templates that can be found under Guidelines and Templates. After the paper submission has been successfully completed, authors will receive an automatic confirmation e-mail.

PUBLICATIONS

All accepted complete papers will be published in the conference proceedings, under an ISBN reference, on paper and on digital support.
SCITEPRESS is a member of CrossRef (http://www.crossref.org/) and every paper on our digital library is given a DOI (Digital Object Identifier).
The proceedings will be submitted for indexation by SCOPUS, Google Scholar, DBLP, Semantic Scholar, EI and Web of Science / Conference Proceedings Citation Index.

SECRETARIAT

ICINCO Secretariat
Address: Avenida de S. Francisco Xavier, Lote 7 Cv. C
             2900-616 Setúbal - Portugal
Tel.: +351 265 520 185
Fax: +351 265 520 186
e-mail: icinco.secretariat@insticc.org
Web: https://icinco.scitevents.org

VENUE

Our conference will take place at the Lisbon Marriott Hotel, this 4 star Venue was considered Portugal’s leading conference hotel.

CONFERENCE CO-CHAIRS

Wolfram Burgard (honorary)University of Freiburg, Germany
Dimitar FilevResearch & Advanced Engineering, Ford Motor Company, United States

PROGRAM CO-CHAIRS

Giuseppina GiniDEIB, Politecnico di Milano, Italy
Henk NijmeijerDepartment of Mechanical Engineering, Eindhoven University of Technology, Netherlands

PROGRAM COMMITTEE MEMBERS

El-Houssaine Aghezzaf, Department of Industrial Management, Ghent University, Faculty of Engineering and Architecture, Belgium
Eugenio Aguirre, Department of Computer Science And Artificial Intelligence, University of Granada, Spain
Rudy Agustriyanto, Chemical Engineering, University of Surabaya, Indonesia
Carlos I. Aldana, Computer Science, University of Guadalajara, Mexico
Manuel Aleixandre, Laboratory for Future Interdisciplinary Research of Science and Technology, Institute of Innovative Research, Tokyo Institute of Technology, Japan
Joaquin Alvarez, Electronics, Center Scientific Research Higher Education Ensenada Cicese, Mexico
Mihail H. Antchev, Faculty of electronic engineering and technology, sectionPower electronics, Technical University - Sofia, Bulgaria
Rui Araujo, Department of Electrical and Computer Engineering, University of Coimbra, Portugal
Ramiro Barbosa, Department of Electrotechnical Engineering, ISEP/IPP - School of Engineering, Polytechnic Institute of Porto, Portugal
Eric Baumgartner, Academics, Milwaukee School of Engineering, United States
Juri Belikov, Software Science, Tallinn University of Technology, Estonia
Karsten Berns, Department Of Computer Science, University of Kaiserslautern-Landau, Germany
Mauro Birattari, IRIDIA, Université Libre de Bruxelles, Belgium
Jean-Louis Boimond, Automatisation, ISTIA - LARIS, France
Magnus Boman, SCS, The Royal Institute of Technology, Sweden
Tobias Bruckmann, Chair of Mechatronics, University of Duisburg-Essen, Germany
Marvin Bugeja, Department of Systems and Control Engineering, University of Malta, Malta
Kenneth Camilleri, Department of Systems and Control Engineering, University of Malta, Malta
Giuseppe Carbone, University of Calabria, Italy
Enrique V. Carrera, Electrical Engineering, Army Polytechnic School Ecuador, Ecuador
Alessandro Casavola, DIMES, University of Calabria, Italy
Marco Castellani, University of Birmingham, United Kingdom
Paul Christodoulides, Cyprus University of Technology, Cyprus
Feng Chu, University of Evry Val d'Essonne, France
Carlos C. Coello, Computer Science Department, CINVESTAV-IPN, Mexico
Sesh Commuri, EBME, University of Nevada, Reno, United States
António Dourado, Informatics Engineering, University of Coimbra, Portugal
Marc Ebner, Institut für Mathematik und Informatik, Ernst-Moritz-Arndt-Universität Greifswald, Germany
Mohammed S. Fadali, Electrical & Biomedical Engineering, UNR, United States
Paolo Fiorini, Department of Computer Science, University of Verona, Italy
Thierry Fraichard, INRIA, France
Eduardo Oliveira Freire, Federal University of Sergipe, Brazil
Georg Frey, Chair of Automation and Energy Systems, Automation and Energy Systems, Saarland University, Germany
Toyomi Fujita, Tohoku Institute of Technology, Tohoku Institute of Technology, Japan
Mauro Gaggero, Institute of Marine Engineering, National Research Council of Italy, Italy
Andrej Gams, Jožef Stefan Institute, Slovenia
Péter Gáspár, Systems and Control Laboratory, SZTAKI, Hungary
Giorgio Gnecco, IMT - School for Advanced Studies - Lucca, Italy
Arthur Gómez, Applied Computer Science Master Program, Universidade do Vale do Rio dos Sinos, Brazil
Noelia Hernández Parra, Computer Engineering Department, Universidad de Alcalá, Spain
Wladyslaw Homenda, Faculty of Mathematics and Information Science, Warsaw University of Technology, Poland
Chiu-Fan Hsieh, National Formosa University, Taiwan, Republic of China
LIU HSU, Electrical Engineering, COPPE-UFRJ, Brazil
Daniela Iacoviello, Department of Computer Control and Management Engineering Antonio Ruberti, Sapienza University of Rome, Italy
Gianluca Ippoliti, Dipartimento di Ingegneria dell'Informazione, Università Politecnica delle Marche, Italy
Sarangapani Jagannathan, Electrical and Computer Engineering, Missouri University of Science and Technology, United States
Isabel Jesus, ISEP-Institute of Engineering of PortoDept. of Electrical Engineering, Rua Dr. Antonio Bernardino de Almeida, 431, ISEP/IPP - School of Engineering, Polytechnic Institute of Porto, Portugal
Fabrício Junqueira, Depto. of Mechatronics and Mechanical Systems, University of São Paulo (USP), Brazil
Tohru Kawabe, Faculty of Engineering, Information and Systems, University of Tsukuba, Japan
Moharram H. Korayem, Robotic Research Lab, Mechanical Engineering Department, Iran University of Science and Technology, Iran, Islamic Republic of
Marek Kraft, Institute of Robotics and Machine Intelligence, Poznan University of Technology, Poland
Dragana Krstic, Telecommunications, University of Nis, Faculty of Electronic Engineering, Serbia
Masao Kubo, computer science, Narional Defense Academy of Japan, Japan
Kolja Kühnlenz, Department of Electrical Engineering ans Computer Science, Coburg University of Applied Sciences and Arts, Germany
Miroslav Kulich, Czech Technical University in Prague, Czech Republic
Sébastien Lahaye, Automatisation, Istia - LARIS, France
Kauko Leiviskä, Control Engineering Laboratory, University of Oulu, Finland
Tsai-Yen Li, Computer Science Department, National Chengchi University, Taiwan, Republic of China
Antonio M. Lopes, Mechanical Engineering, University of Porto, Portugal
Eric Lucet, CEA -French Alternative Energies and Atomic Energy Commission, France
Anthony A. Maciejewski, Electrical And Computer Engineering, Colorado State University, United States
Ester Martinez-Martin, Computer Science and Artificial Intelligence, University of Alicante, Spain
Vicente Matellán-Olivera, Ingenierías Mecánica, Informática y Aeroespacial, SCAYLE, Spain
Takafumi Matsumaru, Waseda University, Japan
Luca Mazzola, School of Information Technology, HSLU - Lucerne University of Applied Sciences, Switzerland
Seán McLoone, Electonics, Electrical Engineering and Computer Science, Queen's Unviersity Belfast, Ireland
Nadhir Messai, University of Reims Champagne-Ardenne, France
Maciej M. Michalek, Poznan University of Technology, Poland
Paulo Miyagi, Mechatronics Engineering, University of Sao Paulo, Brazil
Rezia M. Molfino, DIME-DIBRIS, PMARlab, University of Genova, Italy
Rafael Morales, University of Castilla La Mancha, Spain
Vladimir Mostyn, Department of Robotics - 354, VSB - Technical University of Ostrava, Czech Republic
George Moustris, Electrical & Computer Engineering, National Technical University of Athens, Greece
Riccardo Muradore, Department of Computer Science, University of Verona, Italy
Elena Nechita, Mathematics and Informatics, Vasile Alecsandri University of Bacau, Romania
Juan J. Nieto, Mathematical Analysis and Statistics, University of Santiago de Compostela, Spain
Fernando S. Osorio, ICMC - Instituto de Ciências Matemáticas e de Computação / SSC - Dept. de Sistemas de Computação, USP - Universidade de Sao Paulo, Brazil
Stamatios Papadakis, School of Education - Department of Preschool Education, Department of Preschool Education, Faculty of Education, University of Crete, Greece
Evangelos Papadopoulos, Mechanical Engineering Department, NTUA, Greece
Ju H. Park, Electrical Engineering, Yeungnam University, Korea, Republic of
Igor Paromtchik, Robotic Technologies, France
Dariusz Pazderski, Institute of Automation and Robotics, Poznan University of Technology, Poland
Qingjin Peng, Department of Mechanical Engineering, University of Manitoba, Canada
Tadej Petric, Department of Automation, Biocybernetics and Robotics, Jožef Stefan Institute, Slovenia
Raul Marin Prades, Computer Science and Engineering, Jaume I University, Spain
Radu-Emil Precup, Department of Automation and Applied Informatics, Politehnica University of Timisoara, Romania
Kanty Rabenorosoa, AS2M, Femto-ST Institute, France
José Ragot, Centre de Recherche en Automatique de Nancy, France
Oscar Reinoso, Edif. Innova Ingenieria De Sistemas y Automática, Miguel Hernandez University, Spain
Paolo Rocco, Politecnico di Milano, Italy
Juha Röning, Biomimetics and Intelligent Systems, University of Oulu, Finland
Christophe Sabourin, Laboratoire Images, Signaux, et Systèmes Intelligents, Univ. Paris Est Creteil, LISSI, France
Antonio Sala, Dept. Of Systems Engineering And Control, Universitat Politecnica de Valencia, Spain
Addisson Salazar, Institure of Telecommunications and Multimedia Applications, Universitat Politècnica de València, Spain
Jurek Sasiadek, Carleton University, Canada
Dieter H. Schramm, Faculty of Engineering, University of Duisburg-Essen, Germany
Karol Seweryn, Space Research Centre (CBK PAN), Poland
Antonino Sferlazza, Department of Engineering, University of Palermo, Italy
Jinhua She, School of Engineering, Tokyo University of Technology, Japan
Vasile Sima, Technical Sciences Academy of Romania, Romania
Azura Che Soh, Electrical & Electronic of Engineering, Universiti Putra Malaysia, Malaysia
Adrian-Mihail Stoica, Aerospace Engineering, Polytechnic University Bucharest, Romania
József K. Tar, John Von Neumann Faculty Of Informatics, Institute of Applied Mathematics, Óbuda University, Hungary
Tomasz Tarczewski, Insitute of Engineering and Technology, Nicolaus Copernicus University, Poland
Daniel Thalmann, Ecole Polytechnique Federale de Lausanne, Switzerland
Germano Torres, R&D, PS Solutions, Brazil
Andrés Úbeda, Physics, Systems Engineering and Signal Theory, University of Alicante, Spain
Damir Vrancic, Department of Systems and Control, Jožef Stefan Institute, Slovenia
Qiangda Yang, School of Metallurgy, Northeastern University, China
Jie Zhang, Newcastle University, United Kingdom
Cezary Zielinski, Institute of Control and Computation Engineering, Warsaw University of Technology, Poland

(list not yet complete)

footer