El-Houssaine Aghezzaf,
Department of Industrial Management, Ghent University, Faculty of Engineering and Architecture, Belgium
Eugenio Aguirre,
Department of Computer Science And Artificial Intelligence, University of Granada, Spain
Hyo-Sung Ahn,
Department of Mechatronics, Gwangju Institute of Science and Technology (GIST), Korea, Republic of
Adel Al-Jumaily,
University of Technology Sydney, Australia
Fouad Al-Sunni,
Independent Researcher, Saudi Arabia
Yacine Amirat,
Lissi Laboratory, University Paris Est Créteil (UPEC), France
Stefan Andrei,
Computer Science Department, Lamar University, United States
Peter Arato,
Control Engineering And Information Technology, Budapest University of Technology and Economics, Hungary
Rui Araujo,
Department of Electrical and Computer Engineering, University of Coimbra, Portugal
Helder Araújo,
Department Of Electrical And Computer Engineering, University of Coimbra, Portugal
Alejandro H. Arieta,
Embedded Systems,, Switzerland
Tomas Arredondo,
Electronics Engineering Dept, Universidad Tecnica Federico Santa Maria, Chile
Vijanth S. Asirvadam,
Electrical And Electronics, Universiti Teknologi PETRONAS, Malaysia
T. Asokan,
Engineering Design, Indian Institute of Technology Madras, India
Ali Bab-Hadiashar,
School of Engineering, RMIT University, Australia
Jacky Baltes,
Computer Science, University of Manitoba, Canada
Ruth Bars,
Automation and Applied Informatics, Budapest University of Technology and Economics, Hungary
Victor Becerra,
School of Systems Engineering, University of Reading, United Kingdom
Laxmidhar Behera,
Electrical Engineering, Indian Institute of Technology, Kanpur, India
Karsten Berns,
Department Of Computer Science, University of Kaiserslautern-Landau, Germany
Arijit Bhattacharya,
Norwich Business School, University of East Anglia, United Kingdom
Robert Bicker,
School of Mechanical & Systems Engineering, Newcastle University, United Kingdom
Mauro Birattari,
IRIDIA, Université Libre de Bruxelles, Belgium
Hannes Bleuler,
Microengineering, EPFL Lausanne, Switzerland
Jean-Louis Boimond,
Automatisation, ISTIA - LARIS, France
Magnus Boman,
SCS, The Royal Institute of Technology, Sweden
Thomas Braunl,
EECE, The University of Western Australia, Australia
Mietek Brdys,
Electronic, Electrical and Computer Engineering, University of Birmingham, United Kingdom
Glen Bright,
Mechanical Engineering, University of KwaZulu-Natal, South Africa
Kevin Burn,
Engineering, University of Sunderland, United Kingdom
Amaury Caballero,
Electrical and computer Engineering, Florida International University, United States
Giuseppe Carbone,
DIMEG, Università della Calabria, Italy
Alessandro Casavola,
DIMES, University of Calabria, Italy
Riccardo Cassinis,
Dept. Of Information Engineering, University of Brescia, Italy
Yangquan Chen,
Department Of Electrical And Computer Engineering, Utah State University, United States
Yuh-Min Chen,
Institute of Manufacturing Information and Systems, National Cheng Kung University, Taiwan, Republic of China
Albert Cheng,
Department Of Computer Science, University of Houston, United States
Tsung-Che Chiang,
Computer Science and Information Engineering, National Taiwan Normal University, Taiwan, Republic of China
Sung-Bae Cho,
Computer Science, Yonsei University, Korea, Republic of
Ryszard S. Choras,
Telecommunications, Computer Sciences and EE, UTP University of Sciences and Technology, Poland
Chengbin Chu,
Systems Engineering, ESIEE Paris, Université Paris-Est, France
Carlos C. Coello,
Computer Science Department, CINVESTAV-IPN, Mexico
James M. Conrad,
Electrical and Computer Engineering, University of North Carolina at Charlotte, United States
Yechiel Crispin,
Aerospace Engineering, Embry-riddle Aeronautical University, United States
José B. Cunha,
Engineering, University of Trás-os-montes and Alto Douro, Portugal
Fabrizio Dabbene,
Independent Researcher, Italy
Prithviraj R. Dasgupta,
Computer Science, University of Nebraska, United States
Kathryn J. De Laurentis,
Independent Researcher, United States
Danilo De Rossi,
Centro Interdipartimentale Di Ricerca "E. Piaggio", University of Pisa, Italy
Elena De Santis,
DIEI , University of L'Aquila, Italy
Angel P. Del Pobil,
Department of Engineering and Computer Science, Universitat Jaume I, Spain
Mingcong Deng,
Dept. of Electrical and Electronic Eng., Tokyo University of Agriculture and Technology, Japan
Guilherme DeSouza,
Department Of Electrical And Computer Engineering, University of Missouri, United States
Rüdiger Dillmann,
Computer Science, Karlsruhe Institute of Technology - KIT, Germany
Alexandre Dolgui,
Automation Production and Computer Sciences, IMT Atlantique, France
António Dourado,
Informatics Engineering, University of Coimbra, Portugal
Venky Dubey,
Design and Engineering, Bournemouth University, United Kingdom
Ashish Dutta,
Mechanical ENgg, Indian Institute of Technology Kanpur, India
Marc Ebner,
Institut für Mathematik und Informatik, Ernst-Moritz-Arndt-Universität Greifswald, Germany
Petr Ekel,
Graduate Program In Electrical Engineering, Pontifical Catholic University of Minas Gerais, Brazil
Mohammed El-Abd,
Computer Engineering, American University of Kuwait, Kuwait
Eniko Enikov,
The University of Arizona, United States
Ali Eydgahi,
School of Engineering Technology, Eastern Michigan University, United States
Simon G. Fabri,
Faculty of Engineering, University of Malta, University of Malta, Malta
Jean-Marc Faure,
LURPA, Ecole Normale Superieure de Cachan, France
Javier Fernandez de Canete,
System Engineering and Automation, University of Malaga, Spain
David Fernández-Llorca,
Computer Engineering Department, University of Alcalá, Spain
Paolo Fiorini,
Department of Computer Science, University of Verona, Italy
Juan J. Flores,
Division De Estudios De Posgrado, Facultad De Ingenieria Electrica, University of Michoacan, Mexico
Mauro Franceschelli,
Department of electrical and electronic engineering, Università di Cagliari, Italy
Heinz Frank,
Independent Researcher, Germany
Georg Frey,
Chair of Automation and Energy Systems, Automation and Energy Systems, Saarland University, Germany
Nicholas Gans,
Electrical Engineering, University of Texas at Dallas, United States
Maria I. Garcia-Planas,
Universitat Politecnica de Catalunya, Spain
Ryszard Gessing,
Automatic Control, Silesian University of Technology, Poland
Lazea Gheorghe,
Automation, Technical University of Cluj-Napoca, Romania
Paulo Gil,
Electrical Engineering, Universidade Nova de Lisboa, Portugal
Luis Gomes,
FCT - Dep. Eng. Electrotécnica, Universidade Nova de Lisboa, Portugal
Bhaskaran Gopalakrishnan,
Industrial and Management Systems Engineering, West Virginia University, United States
Frans A. Groen,
Informatics Institute, University of Amsterdam, Netherlands
Da-Wei Gu,
Engineering, University of Leicester, United Kingdom
Jason Gu,
Electrica And Computer Engineering, Dalhousie University, Canada
Kevin Guelton,
CReSTIC EA 3804, University of Reims Champagne-Ardenne, France
Jatinder Gupta,
Department Of Management, Marketing and Information Systems, University of Alabama in Huntsville, United States
Thomas Gustafsson,
Computer Science, Electrical and Space Engineering, Luleå University of Technology, Sweden
Quang P. Ha,
Faculty of Engineering and Information Technology, School of Electrical, Mechanical and Mechatronic Systems, CB02.0737 PO Box 123 Broadway NSW 2007 Australia , University of Technology, Sydney - FEIT, Australia
Maki Habib,
Mechanical Eng. Dept., , The American University in Cairo, Egypt
Wolfgang Halang,
Sino-German Technical Faculty, Qingdao University of Science and Technology, China
Riad I. Hammoud,
Independent Researcher, United States
Qing-Long Han,
School of INformation and Communication Technology, Central Queensland University, Australia
Jennifer Harding,
Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University, United Kingdom
Arturo Hernández - Aguirre,
Computer Science, Centre for Research in Mathematics, Mexico
Suranga Hettiarachchi,
Computer Science, Indiana University Southeast, United States
Victor Hinostroza,
Electrical Engineering And Computation, University of Ciudad Juarez, Mexico
Kaoru Hirota,
Computational Intelligence and Systems Science, Tokyo Institute of Technology, Japan
Wladyslaw Homenda,
Faculty of Mathematics and Information Science, Warsaw University of Technology, Poland
Hesuan Hu,
Nanyang Technological University, Singapore
Atsushi Imiya,
Multimedia Technology Division, IMIT Chiba University, Japan
Sarangapani Jagannathan,
Electrical and Computer Engineering, Missouri University of Science and Technology, United States
Ray Jarvis,
Electrical And Computer Systems Engineering, Monash University, Australia
Thira Jearsiripongkul,
Mechanical Engineering, Thammasat University, Thailand
Myong K. Jeong,
RUTCOR; Industrial Engineering and Systems Engineering, Rutgers University, United States
Ivan Kalaykov,
Department Of Technology, Örebro University, Sweden
Michail Kalogiannakis,
Department of Special Education, University of Thessaly, Greece
Mansour Karkoub,
Mechanical Engineering Department, Texas A&M Universiy, Qatar
Dusko Katic,
Robotics Laboratory, Mihailo Pupin Institute, Serbia
Kazuo Kiguchi,
Mechanical Engineering, Kyushu University, Japan
Jonghwa Kim,
Computer Software, University of Science & Technology, Korea, Republic of
DaeEun Kim,
School of Electrical & Electronic Engineering, Yonsei University, Korea, Republic of
Ashok K. Kochhar,
Engineering Systems and Management, Aston University, United Kingdom
Waree Kongprawechnon,
Thammasat University, Thailand
Israel Koren,
Ece, University of Massachusetts, United States
George L. Kovács,
Computer and Automation Institute, Hungarian Academy of Sciences, Hungary
Krzysztof Kozlowski,
Institute of Automation and Robotics, Poznan University of Technology, Poland
Gerhard K. Kraetzschmar,
Computer Science Department, Bonn-Rhein-Sieg University of Applied Sciences, Germany
Mianowski Krzysztof,
of the Theory of Machines and Robots, Politechnika Warszawska, Poland
Masao Kubo,
computer science, Narional Defense Academy of Japan, Japan
Kin K. Lai,
Managmenet Sciences, City University of Hong Kong, Hong Kong
H. K. Lam,
Department of Engineering, King's College London, United Kingdom
Alexander Lanzon,
School of Electrical and Electronic Engineering, University of Manchester, United Kingdom
Soo-Young Lee,
Independent Researcher, Korea, Republic of
Graham Leedham,
Science and Technology, University of New England, Australia
Kauko Leiviskä,
Control Engineering Laboratory, University of Oulu, Finland
Tsai-Yen Li,
Computer Science Department, National Chengchi University, Taiwan, Republic of China
Youfu Li,
City University of Hong Kong, Hong Kong
Kang Li,
Electrical & Electronic Engineering, Queen's University Belfast, United Kingdom
Yangmin Li,
Department Of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Hong Kong
Gordon Lightbody,
Electrical and Electronic Engineering, University College Cork, Ireland
Huei-Yung Lin,
Department of Computer Science and Information Engineering, National Taipei University of Technology, Taiwan, Republic of China
Józef Lisowski,
Katedra Automatyki Okretowej, Akademia Morska, Poland
Guoping Liu,
Engineering, University of South Wales, United Kingdom
Changchun Liu,
, United States
Xiaoping Liu,
Carleton University, Canada
Luís S. Lopes,
Departamento De Electrónica, Telecomunicações e Informática, University of Aveiro, Portugal
Gonzalo Lopez-Nicolas,
Informatica e Ingenieria de sistemas, Universidad de Zaragoza, Spain
Iuan-Yuan Lu,
Business Management, National Sun Yat-sen University, Taiwan, Republic of China
Edwin Lughofer,
Knowledge-Based Mathematical Systems, Johannes Kepler University, Austria
Martin Lukac,
Computer Science, Nazarbayev University, Kazakhstan
José T. Machado,
Electrical Engineering, Institute of Engineering, Polytechnic of Porto, Portugal
Anthony A. Maciejewski,
Electrical And Computer Engineering, Colorado State University, United States
Nitaigour Mahalik,
Industrial Technology, California State University - Fresno, United States
Frederic Maire,
Faculty of Science and Engineering, Queensland University of Technology, Australia
Om Malik,
Electrical And Computer Engineering, University of Calgary, Canada
Fabio Marchese,
Dipartimento Informatica Sistemistica e Comunicazione, Università degli Studi di Milano-Bicocca, Italy
Philippe Martinet,
INRIA, France
Aníbal Matos,
Departamento De Engenharia Electrotécnica E De Computadores (deec), Faculdade de Engenharia da Universidade do Porto (FEUP), Portugal
Rene V. Mayorga,
Industrial Systems Engineering, University of Regina, Canada
Ross McAree,
School of Mechanical and Mining Engineerging, University of Queensland, Australia
Ken McGarry,
School of Pharmacy, Health and Well-being, University of Sunderland, United Kingdom
Seán McLoone,
Electonics, Electrical Engineering and Computer Science, Queen's Unviersity Belfast, Ireland
Claudio Melchiorri,
DEI, Università di Bologna, Italy
Konstantinos Michail,
Department of Mechanical Engineering and Materials Science and Engineering, Cyprus University of Technology, Cyprus
Patrick Millot,
LAMIH CNRS/University of Valenciennes, University of Valenciennes, France
Sanya Mitaim,
Department of Electrical and Computer Engineering, Faculty of Engineering, Thammasat University, Thailand
Sara Moein,
Mount Sinai School of Medicine, United States
Francesco C. Morabito,
DIMET, University Mediterranea of Reggio Calabria, Italy
Vladimir Mostyn,
Department of Robotics - 354, VSB - Technical University of Ostrava, Czech Republic
Zoltan Nagy,
Chemical Engineering, Loughborough University, United Kingdom
Saeid Nahavandi,
Centre for Intelligent Systems Research, Deakin University, Australia
Andreas Nearchou,
Business Administration, University of Patras, Greece
Sergiu Nedevschi,
Computer Science, Technical University of Cluj-Napoca, Romania
Maria Neves,
Engenharia Informática, Instituto Superior de Engenharia do Porto, Portugal
Klas Nilsson,
Computer Science, Lund University, Sweden
Juan A. Nolazco-Flores,
Independent Researcher, Mexico
Andrzej Obuchowicz,
Institute of Control and Computation Engineering, University of Zielona Góra, Poland
H.R.B. Orlande,
Federal University of Rio de Janeiro, Brazil
Christos Panayiotou,
Department of Electrical and Computer Eng., University of Cyprus, Cyprus
Stefano Panzieri,
Università degli Studi "Roma Tre", Italy
Igor Paromtchik,
Robotic Technologies, France
Bozenna Pasik-Duncan,
Mathematics, University of Kansas, United States
Pierre Payeur,
University of Ottawa, Canada
Marco A. Perez,
Depto. De Control Y Robotica, Universidad Nacional Autonoma de Mexico, Mexico
D. T. Pham,
Mechanical Engineering, The University of Birmingham, United Kingdom
Jeff Pieper,
University of Calgary, Canada
Selwyn Piramuthu,
Information Systems and Operations Management, University of Florida, United States
S. G. Ponnambalam,
Faculty of Manufacturing Engineering, University Malaysia Pahang, Malaysia
Marie-Noëlle Pons,
Lab. Chemical. Engineering Sciences,, France
Raul Marin Prades,
Computer Science and Engineering, Jaume I University, Spain
Libor Preucil,
Czech Institute of Informatics, Robotics and Cybernetics, Czech Technical University in Prague, Czech Republic
José Ragot,
Centre de Recherche en Automatique de Nancy, France
Robert Richardson,
School Of Mechanical Engineering, University of Leeds, United Kingdom
Mihailo Ristic,
Mechanical Engineering, Imperial College London, United Kingdom
Rodney Roberts,
Department Of Electrical And Computer Engineering, Florida State University, United States
Eduardo Rocon,
Independent Researcher, Spain
Juha Röning,
Biomimetics and Intelligent Systems, University of Oulu, Finland
Mehdi Roopaei,
University of Texas at San Antonio, United States
Agostinho Rosa,
ISR - Instituto de Sistemas e Robótica, Portugal
João M. Rosário,
Mechanical Design Department, University of Campinas, Brazil
António Ruano,
DEEI, Fct, University of Algarve, Portugal
Carlos Sagüés,
Instituto de Investigacion en Ingeniería de Aragón, Universidad de Zaragoza, Spain
Mehmet Sahinkaya,
Mechanical and Automotive Engineering, Kingston University London, United Kingdom
Antonio Sala,
Dept. Of Systems Engineering And Control, Universitat Politecnica de Valencia, Spain
Abdel-Badeeh M. Salem,
Faculty of Computer and Information Sciences,Computer Science Dept., Ain Shams University, Egypt
Marcello Sanguineti,
DIBRIS, University of Genoa, Italy
Nilanjan Sarkar,
Mechanical Engineering, Vanderbilt University, United States
Hideyuki Sawada,
Department of Applied Physics, Waseda University, Japan
Daniel Sbarbaro,
Department Of Electrical Engineering, Universidad de Concepcion, Chile
Carla Seatzu,
Department Of Electrical And Electronic Engineering, University of Cagliari, Italy
Gerald Seet,
School of Mechanical & Aerospace Engineering, Nanyang Technological University, Singapore
João Sequeira,
Instituto Superior Técnico, Portugal
Michael Short,
Science & Engineering, Teesside University, United Kingdom
Dan Simon,
Electrical and Computer Engineering, Cleveland State University, United States
Olivier Simonin,
Computer Sciences,, France
Adam Slowik,
Electronics and Computer Science, Koszalin University of Technology, Poland
Andrzej Sluzek,
Electrical and Computer Engineering, Khalifa University, United Arab Emirates
Jae-Bok Song,
Mechanical Engineering, Korea University, Korea, Republic of
Qing Song,
EEE, Nanyang Technological University, Singapore
Safeeullah Soomro,
College of Computer Science AMA International University Salmabad Kingdom of Bahrain, AMA International University, Bahrain
Stefano Squartini,
3MediaLabs, Department of Information Engineering, Università Politecnica delle Marche, Italy
Burkhard Stadlmann,
Automation Engineering, Upper Austria University of Applied Sciences, Wels, Austria
Sergiu Stan,
Dept. of Mechatronics, Technical University of Cluj-Napoca, Romania
Tarasiewicz Stanislaw,
Département De Génie Mécanique, Pavillon Adrien Pouliot, local 1314C, Université Laval, Canada
Olaf Stursberg,
Control and System Theory, Department of Eletrical Engineering and Computer Science, University of Kassel, Germany
Raúl Suárez,
Institut D'Organització i Control de Sistemes Industrials (IOC), Universitat Politecnica de Catalunya (UPC), Spain
Kamesh Subbarao,
Aerospace Engineering, University of Texas at Arlington, United States
Katia Sycara,
Robotics , Carnegie Mellon University, United States
Kazuya Takeda,
Department of Media Science, Nagoya University, Japan
Tianhao Tang,
Institute Of Electrical And Control Engineering, Shanghai Maritime University, China
Abdelhamid Tayebi,
Electrical Engineering, Lakehead University, Canada
Daniel Thalmann,
Ecole Polytechnique Federale de Lausanne, Switzerland
Haydn A. Thompson,
Rolls-Royce UTC, University of Sheffield, United Kingdom
Gui Y. Tian,
Electrical, Electronic and Computer Engineering, Newcastle University, United Kingdom
Sven Tomforde,
Intelligent Embedded Systems Group, University of Kassel, Germany
N. G. Tsagarakis,
Independent Researcher, Italy
Antonios Tsourdos,
Department of Engineering Physics, Cranfield University, United Kingdom
Ali E. Turgut,
Mechanical Engineering Department, E-101, Middle East Technical University, Turkey
Dariusz Ucinski,
Institute of Control and Computation Engineering, University of Zielona Gora, Poland
José Valente de Oliveira,
Faculdade de Ciências e Tecnologia, DEEI, Universidade do Algarve, Portugal
Angel Valera,
Dpto. Ingeniería de Sistemas y Automática, Universidad Politécnica de Valencia, Spain
Job Van Amerongen,
University of Twente, Netherlands
A. F. Van Der Stappen,
Information and Computing Sciences, Utrecht University, Netherlands
Bram Vanderborght,
Robotics % Multibody Mechanics Research Group, Vrije Universiteit Brussel, Belgium
Ramiro Velazquez,
Mechatronics and Control System Lab, Universidad Panamericana, Mexico
Damir Vrancic,
Department of Systems and Control, Jožef Stefan Institute, Slovenia
Eric Wade,
Mechanical, Aerospace, and Biomedical Engineering,, United States
Bernardo Wagner,
Realtime Systems, Leibniz Universität Hannover, Germany
James Whidborne,
Centre for Aeronautics, Cranfield University, United Kingdom
Sangchul Won,
Electronic And Electrical Engineering, Pohang University of Science and Technology, Korea, Republic of
Xun W. Xu,
20 Symonds Street
Department of Mech Eng
University of Auckland, University of Auckland, New Zealand
Bin Yao,
School of Mechanical Engineering, Purdue University, United States
Marek Zaremba,
Informatique et Ingenierie, Université du Québec (UQO), Canada
Primo Zingaretti,
D.I.I., Università Politecnica delle Marche, Italy
Loredana Zollo,
CIR- Laboratory of Biomedical Robotics and Biomicrosystems, Università Campus Bio-Medico, Italy
Argyrios Zolotas,
School of Engineering, University of Lincoln, United Kingdom