Hussein A. Abdullah,
School of Engineering, University of Guelph, Canada
Andrew Adamatzky,
Computer Science, University of the West of England, United Kingdom
El-Houssaine Aghezzaf,
Department of Industrial Management, Ghent University, Faculty of Engineering and Architecture, Belgium
Eugenio Aguirre,
Department of Computer Science And Artificial Intelligence, University of Granada, Spain
Qingsong Ai,
Wuhan University of Technology, China
Adel Al-Jumaily,
University of Technology Sydney, Australia
Erdinç Altug,
Department of Mechanical Engineering, Istanbul Technical University, Turkey
Stefan Andrei,
Computer Science Department, Lamar University, United States
Mihail H. Antchev,
Faculty of electronic engineering and technology, sectionPower electronics, Technical University - Sofia, Bulgaria
Rui Araujo,
Department of Electrical and Computer Engineering, University of Coimbra, Portugal
Helder Araújo,
Department Of Electrical And Computer Engineering, University of Coimbra, Portugal
Rafael Aroca,
Departamento de Engenharia Mecânica, Universidade Federal de São Carlos, Brazil
Vijanth S. Asirvadam,
Electrical And Electronics, Universiti Teknologi PETRONAS, Malaysia
T. Asokan,
Engineering Design, Indian Institute of Technology Madras, India
M. Amine Atoui,
Lab-STICC - CNRS, UMR 6285, UBS, France
Alfonso Baños,
Universidad de Murcia, Spain
Guilherme Barreto,
Teleinformática Engineering, Universidade Federal do Ceará, Brazil
Dennis Barrios-Aranibar,
Computer Science, Universidad Católica San Pablo, Peru
Ruth Bars,
Automation and Applied Informatics, Budapest University of Technology and Economics, Hungary
Laxmidhar Behera,
Electrical Engineering, Indian Institute of Technology, Kanpur, India
Carsten Behn,
Department of Mechanical Engineering, Schmalkalden University of Applied Sciences, Germany
Faïz Ben Amar,
Université Pierre et Marie Curie, Institut Systèmes Intelligents et de Robotique, France
Lyes Benyoucef,
Polytech Marseille, Aix-Marseille University, France
Karsten Berns,
Department Of Computer Science, University of Kaiserslautern-Landau, Germany
Reinaldo Bianchi,
Electrical Engineering Department, Centro Universitario da FEI, Brazil
Mauro Birattari,
IRIDIA, Université Libre de Bruxelles, Belgium
Jean-Louis Boimond,
Automatisation, ISTIA - LARIS, France
Magnus Boman,
SCS, The Royal Institute of Technology, Sweden
Richard D. Braatz,
Massachusetts Institute of Technology, United States
Glen Bright,
Mechanical Engineering, University of KwaZulu-Natal, South Africa
Sebastien Briot,
Laboratoire des Sciences du Numérique de Nantes, France
Kevin Burn,
Engineering, University of Sunderland, United Kingdom
John Burns,
Independent Researcher
Fernando Caballero,
System Engineering and Automation, University of Seville, Spain
Kenneth Camilleri,
Department of Systems and Control Engineering, University of Malta, Malta
Giuseppe Carbone,
DIMEG, Università della Calabria, Italy
Joao Carvalho,
School of Mechanical Engineering, Federal University of Uberlandia, Brazil
Alessandro Casavola,
DIMES, University of Calabria, Italy
Riccardo Cassinis,
Dept. Of Information Engineering, University of Brescia, Italy
Marco Castellani,
University of Birmingham, United Kingdom
Jaime Cerda,
Facultad de Ingeniería Eléctrica, Universidad Michoacana de San Nicolas de Hidalgo, Mexico
Kit Y. Chan,
Department of Electrical and Computer Engineering, Curtin University, Australia
Yuh-Min Chen,
Institute of Manufacturing Information and Systems, National Cheng Kung University, Taiwan, Republic of China
Albert Cheng,
Department Of Computer Science, University of Houston, United States
Sung-Bae Cho,
Computer Science, Yonsei University, Korea, Republic of
Ryszard S. Choras,
Telecommunications, Computer Sciences and EE, UTP University of Sciences and Technology, Poland
Paul Christodoulides,
Cyprus University of Technology, Cyprus
Feng Chu,
University of Evry Val d'Essonne, France
Daisuke Chugo,
School of Science and Technology, Kwansei Gakuin University, Japan
Carlos C. Coello,
Computer Science Department, CINVESTAV-IPN, Mexico
Armando W. Colombo,
Institute for Industrial Informatics, Automation and Robotics (I2AR), Hochschule Emden/Leer, Germany
Armando W. Colombo,
Faculty of Engineering, Institute for Industrial Informatics, Automation and Robotics (I2AR), University of Applied Sciences Emden/Leer, Germany
James M. Conrad,
Electrical and Computer Engineering, University of North Carolina at Charlotte, United States
José B. Cunha,
Engineering, University of Trás-os-montes and Alto Douro, Portugal
Prithviraj R. Dasgupta,
Computer Science, University of Nebraska, United States
Angel P. Del Pobil,
Department of Engineering and Computer Science, Universitat Jaume I, Spain
Kyriakos Deliparaschos,
Saripolou 334th Floor, Office 420 (Tofi Kyriakou Building), Cyprus University of Technology, Cyprus
Mingcong Deng,
Dept. of Electrical and Electronic Eng., Tokyo University of Agriculture and Technology, Japan
Paolo Di Giamberardino,
Computer, Control and Management Engineering, Sapienza University of Rome, Italy
Alexandre Dolgui,
Automation Production and Computer Sciences, IMT Atlantique, France
Daniel Dolz,
Departamento de Ingeniería de Sistemas Industriales y Diseño
Escuela Superior de Tecnología y Ciencias Experimentales
Universitat Jaume I
Campus del Riu Sec, Av. de Vicent Sos Baynat, s/n, Universitat Jaume I, Spain
Wenjie Dong,
Electrical Engineering, University of Texas Rio Grande Valley, United States
Xingye Dong,
Beijing Jiaotong University, China
António Dourado,
Informatics Engineering, University of Coimbra, Portugal
Venky Dubey,
Design and Engineering, Bournemouth University, United Kingdom
Ioan Dumitrache,
Automatic Control Systems and System Engineering, University “POLITEHNICA” of Bucharest, Romania
Marc Ebner,
Institut für Mathematik und Informatik, Ernst-Moritz-Arndt-Universität Greifswald, Germany
Petr Ekel,
Graduate Program In Electrical Engineering, Pontifical Catholic University of Minas Gerais, Brazil
Mohammed El-Abd,
Computer Engineering, American University of Kuwait, Kuwait
Ali Eydgahi,
School of Engineering Technology, Eastern Michigan University, United States
Simon G. Fabri,
Faculty of Engineering, University of Malta, University of Malta, Malta
Christophe Farges,
Bordeaux University, IMS – UMR 5218 CNRS, France
Javier Fernandez de Canete,
System Engineering and Automation, University of Malaga, Spain
Antonella Ferrara,
Dipartimento di Ingegneria Industriale e dell'Informazione, Università degli Studi di Pavia, Italy
Luca Ferrarini,
Politecnico di Milano, Italy
Antoine Ferreira,
Campus de Bourges, INSA Centre Val de Loire, France
Fanny Ficuciello,
Università degli Studi di Napoli Federico II, Italy
Rolf Findeisen,
Electrical Engineering and Information Technology, Control and Cyber-Physical Systems Laboratory, TU Darmstadt, Germany
Paolo Fiorini,
Department of Computer Science, University of Verona, Italy
Fabrizio Flacco,
LIRMM,, France
Juan J. Flores,
Division De Estudios De Posgrado, Facultad De Ingenieria Electrica, University of Michoacan, Mexico
Georg Frey,
Chair of Automation and Energy Systems, Automation and Energy Systems, Saarland University, Germany
Antonio Frisoli,
PERCRO Laboratory, Scuola Superiore Sant’Anna, Italy
Emanuele Frontoni,
Marche Polytechnic University, Italy
Toyomi Fujita,
Tohoku Institute of Technology, Tohoku Institute of Technology, Japan
Mauro Gaggero,
Institute of Marine Engineering, National Research Council of Italy, Italy
Maria I. Garcia-Planas,
Universitat Politecnica de Catalunya, Spain
Ryszard Gessing,
Automatic Control, Silesian University of Technology, Poland
Wojciech Giernacki,
Electrical, Poznan University of Technology/ Institute of Control, Robotics and Information Engineering, Poland
Paulo Gil,
Electrical Engineering, Universidade Nova de Lisboa, Portugal
Giuseppina Gini,
DEIB, Politecnico di Milano, Italy
Maria Gini,
Computer Science and Engineering, University of Minnesota, United States
Adriana Giret,
Department Of Informatic Systems And Computing, Polytechnic University of Valencia, Spain
Nils Goerke,
Computer Science, Autonomous Intelligent Systems, University of Bonn, Germany
Luis Gomes,
FCT - Dep. Eng. Electrotécnica, Universidade Nova de Lisboa, Portugal
Arthur Gómez,
Applied Computer Science Master Program, Universidade do Vale do Rio dos Sinos, Brazil
Amr Goneid,
Computer Science and Engineering, The American University in Cairo, Egypt
Irene Gregory,
Dynamic Systems and Control, NASA Langley Research Center, United States
Lucian T. Grigorie,
Faculty of Aircraft and Military Vehicles, Center for Excellence in Self-Propelled Systems and Technologies for Defense and Security, Military Technical Academy ''Ferdinand I'', Bucharest, Romania
Lech Grzesiak,
Electrical Engineering, Warsaw University of Technology, Poland
Kevin Guelton,
CReSTIC EA 3804, University of Reims Champagne-Ardenne, France
Deepak Gupta,
Industrial and Manufacturing Engineering, Wichita State University, United States
Thomas Gustafsson,
Computer Science, Electrical and Space Engineering, Luleå University of Technology, Sweden
Jan Haase,
Helmut Schmidt University of the Federal Armed Forces Hamburg, Germany
Maki Habib,
Mechanical Eng. Dept., , The American University in Cairo, Egypt
Jörg Hähner,
Chair for Organic Computing, Universität Augsburg, Germany
Kensuke Harada,
Graduate School of Engineering Science, Osaka University, Japan
Jennifer Harding,
Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University, United Kingdom
John Harris,
Dept Of Electrical And Computer Engineering, University of Florida, United States
Milton Heinen,
Campus Bage, Universidade Federal do Pampa, Brazil
Suranga Hettiarachchi,
Computer Science, Indiana University Southeast, United States
Diana Hintea,
Coventry University, United Kingdom
Yasuhisa Hirata,
Tohoku University, Japan
Mathieu Hobon,
DRT/DLORR, CEATech Lorraine, France
Wladyslaw Homenda,
Faculty of Mathematics and Information Science, Warsaw University of Technology, Poland
Morten Hovd,
Department of Engineering Cybernetic, Department of Engineering Cybernetics, Norwegian University of Science and Technology, Norway
Jonathan How,
Massachusetts Institute of Technology, United States
Gianluca Ippoliti,
Dipartimento di Ingegneria dell'Informazione, Università Politecnica delle Marche, Italy
Dmitry Ivanov,
Berlin School of Economics and Law, Germany
Ivan Ivanov,
Department of Statistics and Econometrics, Sofia University "St. Kl. Ohridski", Bulgaria
Sarangapani Jagannathan,
Electrical and Computer Engineering, Missouri University of Science and Technology, United States
Naeem Janjua,
Independent Researcher, Australia
Gerrit Janssens,
Quantitative Methods (Faculty of Business Economics), Hasselt University, Belgium
Thira Jearsiripongkul,
Mechanical Engineering, Thammasat University, Thailand
Michael Jenkin,
Electrical Engineering and Computer Science, York University, Canada
Myong K. Jeong,
RUTCOR; Industrial Engineering and Systems Engineering, Rutgers University, United States
Wootae Jeong,
Transprotation Environmental Research Division, Korea Railroad Research Institute, Korea, Republic of
Isabel Jesus,
ISEP-Institute of Engineering of PortoDept. of Electrical Engineering, Rua Dr. Antonio Bernardino de Almeida, 431, ISEP/IPP - School of Engineering, Polytechnic Institute of Porto, Portugal
Márcio José da Cunha,
Electrical Engineering, Federal University of Uberlândia, Brazil
Marc Jungers,
CRAN , CNRS - Université de Lorraine, France
Imed Kacem,
LCOMS, Université de Lorraine, France
Michail Kalogiannakis,
Department of Special Education, University of Thessaly, Greece
Dimitrios Karras,
Dept. Automation, Sterea Hellas Institute of Technology, Greece
Tohru Kawabe,
Faculty of Engineering, Information and Systems, University of Tsukuba, Japan
Rafael Kelly,
Applied Physics, CICESE Research Center, Mexico
Graham Kendall,
School of Computer Science, University of Nottingham Malaysia Campus, Malaysia
Kazuo Kiguchi,
Mechanical Engineering, Kyushu University, Japan
DaeEun Kim,
School of Electrical & Electronic Engineering, Yonsei University, Korea, Republic of
Israel Koren,
Ece, University of Massachusetts, United States
Krzysztof Kozlowski,
Institute of Automation and Robotics, Poznan University of Technology, Poland
Ondrej Krejcar,
Center for Basic and Applied Research // Faculty of informatics and management, University of Hradec Kralove, Czech Republic
Masao Kubo,
computer science, Narional Defense Academy of Japan, Japan
Barbara Kühnlenz,
Coburg University of Applied Sciences, Germany
Kolja Kühnlenz,
Department of Electrical Engineering ans Computer Science, Coburg University of Applied Sciences and Arts, Germany
Cairo L. L. Nascimento Jr,
Division of Electronic Engineering, Instituto Tecnológico de Aeronáutica, Brazil
Sébastien Lahaye,
Automatisation, Istia - LARIS, France
Jose M. Lastra,
Automation Science and Engineering, Tampere University of Technology, FAST Laboratory, Finland
Sangyoon Lee,
Computer Science, Connecticut College, United States
Dimitri Lefebvre,
Greah Université Le Havre, France
Kauko Leiviskä,
Control Engineering Laboratory, University of Oulu, Finland
Roland Lenain,
Irstea, France
Tsai-Yen Li,
Computer Science Department, National Chengchi University, Taiwan, Republic of China
Yangmin Li,
Department Of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Hong Kong
Guoshi Li,
University of North Carolina at Chapel Hill, United States
Ke Liao,
, United States
Gordon Lightbody,
Electrical and Electronic Engineering, University College Cork, Ireland
Veronique Limère,
Business Informatics and Operations Management, Ghent University, Belgium
Guoping Liu,
Engineering, University of South Wales, United Kingdom
Niels Lohse,
School of Mechanical, Electrical and Manufacturing Engineering, Loughborough University, United Kingdom
Sérgio F. Lopes,
Industrial Electronics, University of Minho, Portugal
Luís S. Lopes,
Departamento De Electrónica, Telecomunicações e Informática, University of Aveiro, Portugal
Antonio M. Lopes,
Mechanical Engineering, University of Porto, Portugal
Gonzalo Lopez-Nicolas,
Informatica e Ingenieria de sistemas, Universidad de Zaragoza, Spain
Ping Lou,
School of Information Engineering, Wuhan University of Technology, China
Yu-Shen Lu,
Department of Mechatronic Engineering, National Taiwan Normal University, Taiwan, Republic of China
Martin Lukac,
Computer Science, Nazarbayev University, Kazakhstan
Danilo Maccio,
Institute of Intelligent Systems for Automation, National Research Council of Italy, Italy
José T. Machado,
Electrical Engineering, Institute of Engineering, Polytechnic of Porto, Portugal
Douglas Macharet,
Universidade Federal De Minas Gerais, Brazil
Anthony A. Maciejewski,
Electrical And Computer Engineering, Colorado State University, United States
Ana Madureira,
Computer Science Department, ISEP/IPP, Portugal
Nitaigour Mahalik,
Industrial Technology, California State University - Fresno, United States
Magdi S. Mahmoud,
Distributed Control Lab, Systems Engineering Dept.,
KFUPM
, King Fahd University of Petroleum and Minerals, Saudi Arabia
Frederic Maire,
Faculty of Science and Engineering, Queensland University of Technology, Australia
Om Malik,
Electrical And Computer Engineering, University of Calgary, Canada
Stamatis Manesis,
Electrical & Computer Engineering Dept., University of Patras, Greece
Fabio Marchese,
Dipartimento Informatica Sistemistica e Comunicazione, Università degli Studi di Milano-Bicocca, Italy
Konrad Markowski,
Faculty of Electrical Engineering, ISEP, Warsaw University of Technology, Poland
Philippe Martinet,
INRIA, France
Tariq Masood,
University of Cambridge, Department of Engineering, Trumpington Street, Cambridge, CB2 1PZ, UK, University of Cambridge, United Kingdom
Ross McAree,
School of Mechanical and Mining Engineerging, University of Queensland, Australia
Joaquim Melendez,
Electronics, Computer Science And Systems Engineering, University of Girona, Spain
Rafael S. Mendes,
Departement of Computer Engineering and Industrial Automation, University of Campinas, Brazil
Nadhir Messai,
University of Reims Champagne-Ardenne, France
Konstantinos Michail,
Department of Mechanical Engineering and Materials Science and Engineering, Cyprus University of Technology, Cyprus
Fabio Morbidi,
MIS laboratory, Université de Picardie Jules Verne, France
Vladimir Mostyn,
Department of Robotics - 354, VSB - Technical University of Ostrava, Czech Republic
Vassilis C. Moulianitis,
Department of Product and Systems Design, University of the Aegean, Greece
Angelica Muñoz-Meléndez,
Computer Science Department, INAOE, Mexico
Riccardo Muradore,
Department of Computer Science, University of Verona, Italy
Saeid Nahavandi,
Centre for Intelligent Systems Research, Deakin University, Australia
Andreas Nearchou,
Business Administration, University of Patras, Greece
Juan J. Nieto,
Mathematical Analysis and Statistics, University of Santiago de Compostela, Spain
George Nikolakopoulos,
Department of Computer, Electrical and Space Engineering, Luleå University of Technology, Sweden
Fernando S. Osorio,
ICMC - Instituto de Ciências Matemáticas e de Computação / SSC - Dept. de Sistemas de Computação, USP - Universidade de Sao Paulo, Brazil
Sanjeevikumar Padmanaban,
Electrical and Electronics Engineering Science, University of Johannesburg, South Africa
Andrea Paoli,
School of Engineering, University of Lincoln, United Kingdom
Ju H. Park,
Electrical Engineering, Yeungnam University, Korea, Republic of
Gordon Parker,
Mechanical Engineering - Engineering Mechanics, Michigan Technological University, United States
Igor Paromtchik,
Robotic Technologies, France
Ignacio Parra-Alonso,
Computer Engineering, University of Alcalá, Spain
Pushparaj M. Pathak,
Mechanical & Industrial Engineering Department, Indian Institute of Technology, India
Dariusz Pazderski,
Institute of Automation and Robotics, Poznan University of Technology, Poland
Ignacio Peñarrocha,
Universitat Jaume I de Castellon, Spain
Qingjin Peng,
Department of Mechanical Engineering, University of Manitoba, Canada
D. T. Pham,
Mechanical Engineering, The University of Birmingham, United Kingdom
S. G. Ponnambalam,
Faculty of Manufacturing Engineering, University Malaysia Pahang, Malaysia
Nirvana Popescu,
Computer Science Department, University Politehnica of Bucharest, Romania
Cesar D. Prada Moraga,
Dpt. Systems Engineering and Automatic Control, Universidad de Valladolid, Spain
Raul Marin Prades,
Computer Science and Engineering, Jaume I University, Spain
Radu-Emil Precup,
Department of Automation and Applied Informatics, Politehnica University of Timisoara, Romania
Libor Preucil,
Czech Institute of Informatics, Robotics and Cybernetics, Czech Technical University in Prague, Czech Republic
José Ragot,
Centre de Recherche en Automatique de Nancy, France
Akshay Rajhans,
Advanced Research & Technology Office, MathWorks, United States
Oscar Reinoso,
Edif. Innova Ingenieria De Sistemas y Automática, Miguel Hernandez University, Spain
Mihailo Ristic,
Mechanical Engineering, Imperial College London, United Kingdom
Patrick Rives,
INRIA - Sophia-Antipolis, France
Juha Röning,
Biomimetics and Intelligent Systems, University of Oulu, Finland
Mehdi Roopaei,
University of Texas at San Antonio, United States
Hubert Roth,
Institute Of Automatic Control Engineering, University Siegen, Germany
António Ruano,
DEEI, Fct, University of Algarve, Portugal
Yassine Ruichek,
IRTES-SET, Université de Technologie Belfort-Montbeliard, France
Jocelyn Sabatier,
IMS Laboratory - Bordeaux University, France
Christophe Sabourin,
Laboratoire Images, Signaux, et Systèmes Intelligents, Univ. Paris Est Creteil, LISSI, France
Mehmet Sahinkaya,
Mechanical and Automotive Engineering, Kingston University London, United Kingdom
Priti S. Sajja,
Department of Computer Science, Sardar Patel University, India
Antonio Sala,
Dept. Of Systems Engineering And Control, Universitat Politecnica de Valencia, Spain
Abdel-Badeeh M. Salem,
Faculty of Computer and Information Sciences,Computer Science Dept., Ain Shams University, Egypt
Roberto Sanchis Llopis,
Enginyeria de Sistemes Industrials i Disseny, Universitat Jaume I, Spain
Marcello Sanguineti,
DIBRIS, University of Genoa, Italy
Nilanjan Sarkar,
Mechanical Engineering, Vanderbilt University, United States
Jurek Sasiadek,
Carleton University, Canada
Hideyuki Sawada,
Department of Applied Physics, Waseda University, Japan
Daniel Schmidt,
FK-AP, SEW EURODRIVE GmbH, Germany
Gerhard Schweitzer,
Mechanical Engineering, ETH Zurich, Switzerland
João Sequeira,
Instituto Superior Técnico, Portugal
Roman Sergienko,
Gini GmbH, Germany
Madhavan Shanmugavel,
Mechatronics Engineering, SRM Institute of Science and Technology, India
Jinhua She,
School of Engineering, Tokyo University of Technology, Japan
Michael Short,
Science & Engineering, Teesside University, United Kingdom
Houria Siguerdidjane,
LSS (Signal and System Laboratory), CentraleSupelec, France
Manuel Silva,
Departamento de Engenharia Electrotécnica, ISEP-Instituto Superior de Engenharia do Porto, Portugal
Vasile Sima,
Technical Sciences Academy of Romania, Romania
Dan Simon,
Electrical and Computer Engineering, Cleveland State University, United States
Daniel Simon,
CAMIN, INRIA, France
Olivier Simonin,
Computer Sciences,, France
Andrzej Sluzek,
Electrical and Computer Engineering, Khalifa University, United Arab Emirates
Jorge Solis,
Dept. of Engineering and Physics / Dept. of Modern Mechanical Engineering, Karlstad University / Waseda University, Sweden
Stefan Sosnowski,
TUM - ITR, Technical University of Munich, Germany
Stefano Squartini,
3MediaLabs, Department of Information Engineering, Università Politecnica delle Marche, Italy
Burkhard Stadlmann,
Automation Engineering, Upper Austria University of Applied Sciences, Wels, Austria
J. D. Stigter,
Mathematical and Statistical Methods, Wageningen University, Netherlands
Olaf Stursberg,
Control and System Theory, Department of Eletrical Engineering and Computer Science, University of Kassel, Germany
Raúl Suárez,
Institut D'Organització i Control de Sistemes Industrials (IOC), Universitat Politecnica de Catalunya (UPC), Spain
Nusret Tan,
Electrical and Electronics engineering, Inonu University, Turkey
Tomasz Tarczewski,
Insitute of Engineering and Technology, Nicolaus Copernicus University, Poland
Daniel Thalmann,
Ecole Polytechnique Federale de Lausanne, Switzerland
Simon Thompson,
AIST, Japan
Gui Y. Tian,
Electrical, Electronic and Computer Engineering, Newcastle University, United Kingdom
Geetam Tomar,
ECE, Machine Intelligence Research Labs, India
Sven Tomforde,
Intelligent Embedded Systems Group, University of Kassel, Germany
Germano Torres,
R&D, PS Solutions, Brazil
Mohamed Trabia,
Mechanical Engineering, University of Nevada, Las Vegas, United States
Damien Trentesaux,
LAMIH UMR CNRS 8201, University of Valenciennes and Hainaut-Cambrésis, France
Wa-Muzemba A. Tshibangu,
1701 E COLD SPRING LANE, BALTIMORE, MD 21251, USA, Morgan State University, United States
Avgoustos Tsinakos,
INDUSTRIAL INFORMATICS / Master of Distance Education, University of Kavala Institute of Technology / Athabasca University of Canada, Greece
Antonios Tsourdos,
Department of Engineering Physics, Cranfield University, United Kingdom
Ali E. Turgut,
Mechanical Engineering Department, E-101, Middle East Technical University, Turkey
Bartlomiej Ufnalski,
Institute of Control and Industrial Electronics, Warsaw University of Technology, Poland
José Valente de Oliveira,
Faculdade de Ciências e Tecnologia, DEEI, Universidade do Algarve, Portugal
Angel Valera,
Dpto. Ingeniería de Sistemas y Automática, Universidad Politécnica de Valencia, Spain
Antonis Vardulakis,
Department of Mathematics, Aristotle University of Thessaloniki, Greece
César Vargas Rosales,
Electrical and Computer Engineering, ITESM - Monterrey, Mexico
Germano Veiga,
Independent Researcher, Portugal
Ramiro Velazquez,
Mechatronics and Control System Lab, Universidad Panamericana, Mexico
Hugo Vieira Neto,
Graduate Program of Electrical and Computer Engineering, Federal University of Technology - Paraná, Brazil
Arnoud Visser,
Informatics Institute, Universiteit van Amsterdam, Netherlands
Damir Vrancic,
Department of Systems and Control, Jožef Stefan Institute, Slovenia
Bernardo Wagner,
Realtime Systems, Leibniz Universität Hannover, Germany
Mattias Wahde,
Department of Applied Mechanics, Chalmers University of Technology, Sweden
Feng Wan,
Department of Electrical and Computer Engineering, University of Macau, Macau
Zhenzhen Wang,
Shenyang Institute of Automation, Chinese Academy of Sciences, China
Jinling Wang,
University of New South Wales (UNSW) Australia, Australia
Jingyu Wang,
School of Astronautics, Northwestern Polytechnical University (NPU), China
Tongquan Wei,
Computer Science and Technology, East China Normal University, China
Michael Weyrich,
Institute of Industrial Automation and Software Systems, University of Stuttgart, Germany
James Whidborne,
Centre for Aeronautics, Cranfield University, United Kingdom
Warren White,
Mechanical and Nuclear Engineering, Kansas State University, United States
Min Wu,
School of Automation, China University of Geosciences, China
Wenjun Xu,
School of Information Engineering, Wuhan University of Technology, China
Farouk Yalaoui,
Charles Delaunay Institute, LOSI, University of Technology of Troyes, France
Qinmin Yang,
Department of Control Science and Engineering, Zhejiang University, China
Gang Yao,
Sino-Dutch Mechatronics Engineering College, Shanghai Maritime University, China
Weiwei Yu,
School of Mechanical Engineering, Northwestern Polytechnical University, China
Hui Yu,
University of Portsmouth, United Kingdom
Ludek Zalud,
CEITEC STI, Brno University of Technology, Czech Republic
Marek Zaremba,
Informatique et Ingenierie, Université du Québec (UQO), Canada
Massimiliano Zecca,
School of Electronic, Electrical and Systems Engineering, Loughborough University, United Kingdom
Yuming Zhang,
Electrical and Computer Engineering, Univ. of Kentucky, United States
Jie Zhang,
Newcastle University, United Kingdom
Ray Y. Zhong,
Mechanical Engineering, The University of Auckland, New Zealand
Hanqi Zhuang,
Comnputer and Elecrtical Engineering and Computer Science, Florida Atlantic University, United States
Primo Zingaretti,
D.I.I., Università Politecnica delle Marche, Italy
Alois Zoitl,
LIT Cyber-Physical Systems Lab, Johannes Keppler University, Austria
Argyrios Zolotas,
Engineering, University of Lincoln, United Kingdom